Panasonic AJ-SD755 operating instructions Time Code

Setup menus

USER menu		<TIME CODE>
No./Item		Description
500	For selecting whether to output the VITC
	signal at the positions selected by setup
VITC BLANK	menu items No. 501 (VITC POS-1) and No. 502
	(VITC POS-2).
	0000	BLANK : VITC signals are not output.
	0001	THRU : VITC signals are output.
501	This sets the position where the VITC signal
	is to be inserted.
VITC POS-1
	0000	10L
	:	:
	0006	16L
	:	:
	0010	20L
	<Note>
	The same line as the one used for the setup
	menu items No. 502 (VITC POS-2) and No. 662
	(UMID POS) setting cannot be set.
502	This sets the position where the VITC signal
	is to be inserted.
VITC POS-2
	0000	10L
	:	:
	0008	18L
	:	:
	0010	20L
	<Note>
	The same line as the one used for the setup
	menu items No. 501 (VITC POS-1) and No. 662
	(UMID POS) setting cannot be set.
503	This selects the signal to be regenerated
	when the time code generator (TCG) in the
TCG REGEN	REGEN mode.
	0000	TC&UB :
	Both the time code and user bit are
	regenerated.
	0001	TC :
	Only the time code is regenerated.
	0002	UB :
	Only the user bit is regenerated.
504	This selects whether the time code is to be
	regenerated during automatic editing using
REGEN MODE	the unit’s control panel.
	0000	AS&IN :
	Time code is regenerated with assemble or
	insert editing.
	0001	ASSEM :
	Time code is regenerated with assemble
	editing.
	0002	INSRT :
	Time code is regenerated with insert editing.
	0003	SW :
	Setting complies with TCG switch setting.

The underlined items indicates the initial setting.

No./Item		Description
505	This selects the time code to be used when
	an external time code is to be used.
EXT TC SEL
	0000	LTC :
	The LTC of the TIME CODE IN connector is
	used.
	0001	VITC :
	The VITC of the input video signal is used.
506	This sets the usage status of the user bit of
	the time code generated by the TCG.
BINARY GP
	0000	000 :
	NOT SPECIFIED (character set not specified)
	0001	001 :
	ISO CHARACTER (8 bits character set based
	on ISO646, ISO2022)
	0002	010 : UNASSIGNED 1 (undefined)
	0003	011 : UNASSIGNED 2 (undefined)
	0004	100 : UNASSIGNED 3 (undefined)
	0005	101 : PAGE/LINE
	0006	110 : UNASSIGNED 4 (undefined)
	0007	111 : UNASSIGNED 5 (undefined)
507	This selects whether to control the phase
	correction of the LTC which is output from
PHASE CORR	the TIME CODE OUT connector.
	0000	OFF :
	Phase correction control is not performed.
	0001	ON :
	Phase correction control is performed.
508	This selects whether the CF flag of the TCG is
	to ON.
TCG CF FLAG
	0000	OFF : CF flag is OFF.
	0001	ON : CF flag is ON.
509	This selects the DF or NDF mode for CTL and
	TCG.
DF MODE
	0000	DF : The drop frame mode is used.
	0001	NDF : The non-drop frame mode is
		used.
	<Note>
	Drop frame mode is valid only when the
	CONTROL switch is set to LOCAL or the setup
	menu No. 001 (LOCAL ENA) is set to ENA.
510	This is used to switch the phase of the time
	code, which is output from the TIME CODE
TC OUT REF	OUT connector, for the external LTC input
	when the TCG switch is at the EXT position.
	0000	V OUT :
	Time code is synchronized with output video
	signal.
	0001	TC_IN :
	Time code is synchronized with external time
	code input.

43