Panasonic AJ-SD755 Number of lines which can be set for Teletext, Det, REC LINE13, Blank Line

Setup menus

USER menu		<V BLANK>
No./Item		Description
803	For selecting the method used to detect the
	lines in which the teletext signals are to be
TELETEXT	recorded.
DET
	0000	OFF :
	The teletext signals are not recorded.
	0001	AUTO :
	The teletext signals are automatically detected
	and recorded.
	0002	MANU :
	The lines in which the teletext signals are to be
	recorded are selected and set.
	<Notes>
	OThe number of lines in which the teletext
	signals can be recorded depends on the
	number of recording lines which was entered
	as the setup menu No. 800 (ADD LINE)
	setting. [See “Number of lines which can be set
	for teletext.”]
	OWhen setting “MANU” is selected and the
	STOP button is pressed, operation transfers to
	the sub-screen, and the number of recording
	lines can be selected.
	To return from the sub-screen, press the STOP
	button again.
	OWhen the input signal is a non-standard signal
	or N-STD has been selected for the setup
	menu No. 303 (STD/NONSTD) setting, teletext
	signals will not be played back correctly in EE
	mode.
Sub-screen
00	For selecting the lines in which the teletext
REC LINE1	signals are to be recorded.
:
12	0000	OFF
REC LINE13	0001	10&273
	0002	11&274
	0003	12&275
	0004	13&276
	0005	14&277
	0006	15&278
	0007	16&279
	0008	17&280
	0009	18&281
	0010	19&282
	0011	20&283
	0012	21&284
	0013	22

The underlined items indicates the initial setting.

No./Item		Description
804	This turns the blanking ON or OFF in the
	vertical blanking period of the video output
BLANK LINE	signals.
	0000	BLANK :
	Blanking is effected forcibly for all lines.
	0001	THRU :
	No blanking is effected for any of the lines.
	0002	MANU :
	Blanking ON or OFF is selected for each line.
	<Note>
	When setting “MANU” is selected and the STOP
	button is pressed, operation transfers to the sub-
	screen, and ON or OFF can be selected for each
	line. To return from the sub-screen, press the
	STOP button again.
Sub-screen
00	0000	BLANK : Blanking is forcibly effected.
LINE 10&273	0001	THRU : No blanking is effected.
:
11
LINE 21&284

Number of lines which can be set for TELETEXT

The number of lines differs, depending on whether ON or OFF has been selected for the setup menu item No. 660 (UMID REC) setting.

No. 800: ADD LINE	Number of lines which can be set
setting value	UMID REC: ON	UMID REC: OFF
OFF	10	13
YC422	4	5
YC411	5	8
Y1_B/W, Y1_BPF, C1	10	13
Y2_B/W, Y2_BPF, C2	4	5

52