Panasonic AJ-SD755 operating instructions User menu Audio

Setup menus

USER menu <AUDIO>

No./Item		Description
728	This selects whether to superimpose the
	audio data onto the SDI output.
EMBEDDED
AUD	0000	OFF : Data is not superimposed.
	0001	ON : Data is superimposed.
	<Note>
	When no optional board (AJ-YA755G) has been
	installed, setup menu No. 728 is not displayed.
731	This selects whether or not the cue signal is
	to be output to the main line output in the
CUE OUT SEL	search mode.
	0000	OFF : CUE is not output.
	0001	ON : CUE is output.
	<Notes>
	OThis function works only when a setting
	other than MANU has been selected by
	setup menu No. 721 (MONI CH SEL).
	OThe main signal system output channels
	used for the CUE output differ depending on
	the setting selected by setup menu No. 735
	(MON AUTO SEL).
	When L/R is selected:
		CUE is output to CH1 and CH4.
	When L is selected:
		CUE is output to CH1.
	When R is selected:
		CUE is output to CH2.
	OWhen PCM has been selected as the setup
	menu No. 721 (MONI CH SEL) setting, PCM
	is output.

The underlined items indicates the initial setting.

<Concerning the CUE output in the search mode>

No./Item		Description
733	This selects the timing for the output picture and
	CUE output when CUE has been selected for
CUE OUT	monitor output.
	0000	NORMAL : The timing is aligned with the
		output picture.
	0001	DIRECT : Whatever has been recorded on
		the tape is output with no delay.
	<Note>
	When DIRECT has been selected, the timing of the
	output picture and that of the cue output are not
	aligned properly.
734	This selects whether the operation of the
	MONITOR SELECT button on the front panel is to
MONI SEL INH	be enabled or disabled.
	0000	OFF : Operation is enabled.
	0001	ON : Operation is disabled.
	0002	ON1 :
	Operation is disabled in the FULL display mode
	and enabled only in the FINE display mode.
735	Although CUE is automatically output to the
	monitor output in accordance with the operation
MON AUTO	mode when a setting AUTO has been selected by
SEL	setup menu item No. 721 (MONI CH SEL), the
	MON AUTO SEL setup menu item is used to
	select the monitor channel which is to be
	automatically switched to CUE.
	0000	L/R :
	CUE is output to both the left and right channels.
	0001	L :
	CUE is output to the left channel only.
	0002	R :
	CUE is output to the right channel only.

The table below shows how the CUE output to the monitor and main signal system outputs differs according to how the setup menu item (No. 721, No. 731 and No. 735) settings are combined.

731	721	735	Monitor output		Main signal system output
CUE OUT	MONI CH	MON AUTO
SEL	SEL	SEL	Lch	Rch	CH1	CH2
	MANU	----------	PCM 21	PCM 21
		L/R	CUE	CUE	PCM 21	PCM 21
OFF	AUTO	L	CUE	PCM 21
		R	PCM 21	CUE
	PCM	----------	PCM 22	PCM 22	PCM 22	PCM 22
	MANU	----------	PCM 21	PCM 21	PCM 21	PCM 21
		L/R	CUE	CUE	CUE	CUE
ON	AUTO	L	CUE	PCM 21	CUE	PCM 21
		R	PCM 21	CUE	PCM 21	CUE
	PCM	----------	PCM 22	PCM 22	PCM 22	PCM 22

<Notes>

21: PCM audio signal output is muted when the VTR is played outside the –0.43 to +1 normal speed.

22: PCM audio signal output is muted when the VTR is played outside the –10 to +10 normal speed.

When either AUTO is selected, the PCM audio signal is output within –0.43 to +1 normal speed even in the automatic CUE output mode.

49