Panasonic AJ-D650 manual Auto REW, Memory, Stop, 9P SEL, Id Sel, Other

Setup (setting) menus

USER menu

<OPERATION>		(continued)
	Item			Setting
							Description
No.	Superimposed		No.		Superimposed
	display					display
112	AUTO REW		0000			OFF	This selects whether to rewind the tape automatically to the
			0001			ON	tape start when the tape end is detected.
							0: The tape stops at the tape end.
							1: The tape is rewound to the tape start.
113	MEMORY		0000			OFF	This selects whether the VTR is to stop automatically when
	STOP		0001			ON	the counter value reaches “0” during a fast forwarding or
							rewinding operation in the CTL mode.
							0: The VTR does not stop.
							1 : The VTR stops automatically.
							<Notes>
							1. The stop mode concerned is either the stop or the still-
							picture (SHTL STILL) mode depending on the setup menu
							No. 313 (AFTER CUE-UP) setting.
							2. When both the AUTO REW function and MEMORY
							function have been selected at the same time, the AUTO
							REW function takes precedence.

The underline on the setting item denotes the initial setting.

USER menu

<INTERFACE>

	Item		Setting
									Description
No.	Superimposed	No.		Superimposed
	display				display
201	9P SEL	0000			OFF	This selects whether the 9P connector functions when the
		0001			ON		REMOTE/LOCAL switch has been set to REMOTE.
							0: Do not function
							1:	Function
202	ID SEL	0000			OTHER	This selects the ID information which is returned to the
		0001			DVCPRO		controller.
							0:	20	25H
							1:	DVCPRO’s, own ID is returned (F0 33H).

The underline on the setting item denotes the initial setting.

– 3 0 –