Panasonic AJ-D650 manual Vitc, Blank, Thru, Tcg, Tc&Ub, Regen, Mode, Ext Tc, Ltc, Binary

Setup (setting) menus

USER menu

<TIME CODE>

	Item		Setting
								Description
No.	Superimposed	No.		Superimposed
	display				display
500	VITC	0000			10L		This sets the position where the VITC signal is to be inserted.
	POS-1	0001			11L		(The same line as for VITC POS-2 in 501 cannot be
							selected.)
		0002			12L
		0003			13L
		0004			14L
		0005			15L
		0006			16L
		0007			17L
		0008			18L
		0009			19L
		0010			20L
501	VITC	0000			10L		This sets the position where the VITC signal is to be inserted.
	POS-2	0001			11L		(The same line as for VITC POS-1 in 500 cannot be
							selected.)
		0002			12L
		0003			13L
		0004			14L
		0005			15L
		0006			16L
		0007			17L
		0008			18L
		0009			19L
		0010			20L
502	VITC	0000			BLANK		This selects whether to output the VITC data to the positions
	BLANK	0001			THRU		selected by VITC POS-1 in 500 and VITC POS-2 in 501.
							0: Data is not output.
							1: Data is output.
503	TCG	0000			TC&UB		This selects the signal to be regenerated when the time code
	REGEN	0001			TC		generator (TCG) in the REGEN mode.
		0002			UB		0: Both the time code and user bit are regenerated.
							1: Only the time code is regenerated.
							2: Only the user bit is regenerated.
504	REGEN	0000			OFF		This selects whether values used in the internal time code
	MODE	0001			ON		generator are preset from the front panel or remote controller
							or synchronized with time code values read from the tape.
							0: Values are preset from the front panel or remote
								controller. (PRESET)
							1: Values are synchronized with time code values read from
								the tape. (REGEN)
							<Note>
							When “1” is selected, values selected at set up menu No.503
							(TCG REGEN) are regenerated.
505	EXT TC	0000			LTC		This selects the time code to be used when an external time
	SEL	0001			VITC		code is to be used.
							0: The LTC of the TIME CODE IN connector is used.
							1: The video signal VITC is used.
506	BINARY	0000			000		This sets the usage status of the user bit of the time code
	GP	0001		001			generated by the TCG.
		0002		010			0: NOT SPECIFIED (character set not specified)
		0003		011			1: ISO CHARACTER (8 bits character set based on lSO646,
								lSO2022)
		0004		100
						2:		UNASSIGNED 1 (undefined)
		0005		101
							3: UNASSIGNED 2 (undefined)
		0006		110
							4: UNASSIGNED 3 (undefined)
		0007		111
							5 : PAGE/LINE
						6:		UNASSIGNED 4 (undefined)
						7:		UNASSIGNED 5 (undefined)

The underline on the setting item denotes the initial setting.

– 3 3 –