MOTION DETECTION
1.Click the DVMD tab. The DVMD page appears. Refer to Figure 65.
2.Select the “Detector on” radio button.
3.Select the Preview checkbox. The video has blue squares over the entire area meaning the entire video has been selected for motion detection.
4.Click “Clear all” to remove all of the boxes or click the right mouse button on each box you want to remove.
5.Click “Mark all” to select the entire video for motion detection or click the left mouse button to add individual boxes.
6.Click “Discard changes” to undo your changes.
7.Drag the triangles on the slider bars to select the minimum time between events and the video motion detection (VMD) sensitivity.
8.Click Apply.
Figure 65. Motion Detection Page
52 |
|