Pelco C636M-F manual Manager for Data Translator

Page 73

I/O Manager for Data Translator

The Step 3 and Step 4 screens in the I/O Manager Configuration are used to configure the data translator. Step 3 configures the recorder channels with the selected data translator. Step 4 translates the event type from one type to another.

If you are already in the I/O Manager Configuration, follow the steps below.

If you are not in the I/O Manager Configuration, go to Start > Programs > DX9000 Server > IO Manager Configuration. In the I/O Manager Configuration, click Next three times to reach Step 3.

Refer to Figure 90 for the following steps.

1.Select the channel(s) you want to configure with the data translator.

2.Enter the server name that the data translator is connected to.

3.Select Device 2 as configured in the I/O Handler. This is the logical device number that the data translator is connected to.

4.In the Port field, enter the alarm number you want to activate in the matrix switcher.

NOTE: In the Port field, you can enter and configure only alarm numbers (physical and logical numbers in the CM9760 System Manager). If you select several channels, the port number you enter will be the starting port. That means the first port on the data translator is 1.

5.Click OK. The information you entered appears on the screen.

NOTE: If you click Clear, all configurations for the selected channel are deleted.

Figure 90. Dialog Box to Configure Data Translator

C636M-F (3/09)

73

Image 73

Contents DX9100 Series Contents C636M-F 3/09 List of Illustrations 100 List of Tables Important Safety Instructions DX9100DVR Series Regulatory NoticesDescription DX9100VSR ModelsFront View of Recorder Front View RecorderBack View of Recorder Back View RecorderFront View of Viewstation Front View ViewstationBack View of Viewstation Back View ViewstationWindows 2000 license label on unit Installation Guidelines Mounting DX9100 Rack Mount Installation Connections System Connections Wiring Alarms and Relays Power UP the Equipment Programming Viewstation Network ConfigurationChanging the VIEWSTATION’S Identification Viewstation Local Area Connection Status Dialog Box Changing the VIEWSTATION’S IP Address and Subnet MaskClick Properties. The following dialog box appears Changing the RECORDER’S Identification Time Synchronization Time Zone Setting DATE/TIME PropertiesClient Configuration Utility C636M-F 3/09 Recorder Initialization Options DX9116F Frame Rate and ResolutionC636M-F 3/09 Go to Start Programs DX9000 Viewstation Server State Server StateError Alert Advanced Recorder Options Database Backup and RepairSystem Tray Database RestorationMy Computer Window Databases Window Rename Mssql to MSSQLold Mssql Folders Delete MSSQLold C636M-F 3/09 Restore Utility Dialog Box Go to the system tray Start/Continue Window C636M-F 3/09 Finished Scan Dialog Box Alarm Modes/Relay Intervals Dialog Box Configuring Standard Alarm and Relay PropertiesCamera Properties Dialog Box Camera Recording PropertiesContinuous Recording Schedule Daily Recording Schedule Continuous Recording ScheduleDaily Event Recording Continuous Weekly Recording Schedule Weekly Recording ScheduleMotion Detection Motion DetectionCamera Video Setup Channel SetupParameter Description/Action User Manager Dialog Box Defining UsersEdit Existing Users Handler InterfaceManager Recorder Connecting AN Alarm UnitCM9760 Alarm Driver Dialog Box Select CM9760ALM.dll Alarm Unit ConfigurationClick Open. The following dialog box appears Manager for Alarm Unit Sample Configuration for External 1 Source Click Next. The following dialog box appears Connecting a CM9760-REL Connecting a Relay UnitCM9760 Relay Driver Dialog Box Select CM9760REL.dll Relay Unit ConfigurationClick Open. The following dialog box appears Manager for Relay Unit Click Next. The following dialog box appears CM9760-DT Connecting a CM9760-CC1Connecting a CM6800 Connecting a CM6800CM9760 Data Translator Driver Dialog Box Select CM9760DT.dll Data Translator ConfigurationClick Open. The following dialog box appears Manager for Data Translator Click Next. The following dialog box appears Data Translator Connections DVR ManagementConfiguring the Data Translator Click Configure. The following dialog box appears Relay Unit Connections Connecting a CM9760-REL for DVR ManagementConfiguring the Relay Unit Click Configure. The following dialog box appears Foreign Language Programming Click Set Default. The following dialog box appears Specifications Viewstation Product Warranty and Return Information