Pelco dx8100-exp installation manual Interfacing the Expansion Unit and DX8100

Page 16

To connect the Expansion Unit to the DX8100 DVR:

1.Do one of the following:

•Rack mounting: Attach the rack mount kit and install the Expansion Unit in the rack enclosure directly above the DX8100.

•Desktop mounting: Set the Expansion to the side or on top of the DX8100.

2.Connect the 68-pin Expansion cable end (partially shown in Figure 15) to the Expansion Unit connector, and then connect the 50-pin Expansion cable end to DX8100 I/O card.

3.Plug the power cord back into the DX8100 and then into the wall.

Figure 15. Interfacing the Expansion Unit and DX8100

16	C2636M (11/06)

Image 16

Contents DX8100-EXP Expansion Unit Installation Manual Page Introduction This document is organized into the following sectionsParts List Other DX8100 Optional Accessories Tools NeededUnplug the power cord from the wall socket Getting ReadyC2636M 11/06 Prepare DX8100 for Expansion Unit Installation Open the DX8100 ChassisComponent Layout CPUInstall the DX8100 I/O Card TV/Audio cable Video ribbon cable 32-pin DX8100 I/O cardInstalling the DX8100 I/O Card Installing the Capture Card Optional Capture Card identical to the main Pin ribbon cableInstalling the Optional Capture Card Reassemble the Unit To reassemble the DX8100Connecting the Expansion Unit to the DX8100 Item QtyInterfacing the Expansion Unit and DX8100 Power on the DX8100 Restarting the UnitPage Product Warranty and Return Information ISO9001

Related manuals

Manual 20 pages 46.03 Kb