Pelco dx8100-exp installation manual Power on the DX8100, Restarting the Unit

Page 17

4. Power on the DX8100.

Figure 16. Restarting the Unit

5.Log in to the DX8100 and verify that the additional devices are displayed in the DX8100 site tree. For information about the additional features provided by the Expansion Unit, refer to Table A on page 4.

6.This completes the Expansion Unit installation process.

The DX8100 DVR does not have to be powered down to connect devices to the Expansion Unit.

To connect devices to the Expansion Unit:

1.Power down the Expansion Unit by disconnecting the 68-pin Expansion cable end at the Expansion Unit. The Expansion Unit is powered down.

2.Connect the additional devices to the Expansion Unit.

3.Reconnect the 68-pin Expansion cable end to the Expansion Unit. The Expansion Unit is powered up.

4.Configure the DX8100 to work with the new devices attached to the Expansion Unit.

C2636M (11/06)

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents DX8100-EXP Expansion Unit Installation Manual Page This document is organized into the following sections IntroductionParts List Tools Needed Other DX8100 Optional AccessoriesGetting Ready Unplug the power cord from the wall socketC2636M 11/06 Open the DX8100 Chassis Prepare DX8100 for Expansion Unit InstallationCPU Component LayoutTV/Audio cable Video ribbon cable 32-pin DX8100 I/O card Install the DX8100 I/O CardInstalling the DX8100 I/O Card Optional Capture Card identical to the main Pin ribbon cable Installing the Capture CardInstalling the Optional Capture Card To reassemble the DX8100 Reassemble the UnitItem Qty Connecting the Expansion Unit to the DX8100Interfacing the Expansion Unit and DX8100 Restarting the Unit Power on the DX8100Page Product Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 46.03 Kb
Top Page Image Contents