Pelco dx8100-exp installation manual C2636M 11/06

Page 7

6.Ensure that the DX8100 Series DVR and all of its components are protected against electrostatic discharge (ESD). Before handling any electronic components, you should take steps to ground yourself properly so that any built-up static electric charges are dissipated away from the unit. The most effective method for combating ESD is to use a properly grounded wrist strap.

NOTE: If you do not have access to a grounded wrist strap, you can discharge any built-up static by periodically touching an unpainted section of the chassis.

Figure 5. ESD Protection

7.Install the Expansion Unit PC cards and cabling.

8.Connect the Expansion Unit to the DX8100.

9.Start the DX8100 and verify that you have access to the additional features/functions that are supported by the Expansion Unit.

C2636M (11/06)

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DX8100-EXP Expansion Unit Installation Manual Page This document is organized into the following sections IntroductionParts List Tools Needed Other DX8100 Optional AccessoriesGetting Ready Unplug the power cord from the wall socketC2636M 11/06 Open the DX8100 Chassis Prepare DX8100 for Expansion Unit InstallationCPU Component LayoutTV/Audio cable Video ribbon cable 32-pin DX8100 I/O card Install the DX8100 I/O CardInstalling the DX8100 I/O Card Optional Capture Card identical to the main Pin ribbon cable Installing the Capture CardInstalling the Optional Capture Card To reassemble the DX8100 Reassemble the UnitItem Qty Connecting the Expansion Unit to the DX8100Interfacing the Expansion Unit and DX8100 Restarting the Unit Power on the DX8100Page Product Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 46.03 Kb
Top Page Image Contents