Pelco dx8100-exp installation manual Component Layout, Cpu

Page 9

COMPONENT LAYOUT

Figure 7 shows the slots and the DX8100 Series DVR’s major components. Some detail is removed from the illustrations in this manual for the purpose of clarity. (Slots on the motherboard are labeled differently.)

REAR

OF

DVR

FRONT

OF

DVR

Figure 7. DX8100 Interior

Table E describes the DX8100’s slot assignments and major components.

Table E. DX8100 Slot Assignments and Major Components

Item Description

Item

Description

Slot 1: PTZ card installed in PCI connector

 

CPU

Slot 2: Capture Card installed in PCI connector

Power supply

Slot 3: PCI connector

DIMM sockets (RAM)

Slot 4: x1 PCI Express connectors

DVD-RW

Slot 5: x1 PCI Express connectors

Hard drive bay

Slot 6: x16 PCI Express connector

Front cross-brace

Slot 7: Optional Expansion Unit I/O card

Rear cross-brace

C2636M (11/06)

9

Image 9
Contents DX8100-EXP Expansion Unit Installation Manual Page This document is organized into the following sections IntroductionParts List Tools Needed Other DX8100 Optional AccessoriesGetting Ready Unplug the power cord from the wall socketC2636M 11/06 Open the DX8100 Chassis Prepare DX8100 for Expansion Unit InstallationCPU Component LayoutTV/Audio cable Video ribbon cable 32-pin DX8100 I/O card Install the DX8100 I/O CardInstalling the DX8100 I/O Card Optional Capture Card identical to the main Pin ribbon cable Installing the Capture CardInstalling the Optional Capture Card To reassemble the DX8100 Reassemble the UnitItem Qty Connecting the Expansion Unit to the DX8100Interfacing the Expansion Unit and DX8100 Restarting the Unit Power on the DX8100Page Product Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 46.03 Kb