FUNAI ZV450TT8 owner manual Hints for Timer Recording, Priority of Overlapped Settings

Page 49

TIMER RECORDING

Introduction

Hints for Timer Recording

•If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost.

•If a disc is not inserted, "DVD" on the front panel display

flashes and timer recording cannot be performed. In some cases, will appear momentarily around the start point as the unit attempts to record. Please insert a recordable disc.

•If a cassette tape with an erase-protection tab is not in the cassette compartment or there is no cassette tape in the cassette compartment, “VCR” on the front panel display flashes and timer recording cannot be performed. Please insert a recordable cassette tape.

•If you press [T-SET]and turn on the unit while either DVD or VCR is in timer standby mode, disappears. In this case, you cannot change the mode between DVD and VCR. You cannot change any settings using [SETUP] or edit discs.

•When all the timer recording is completed, flashes. To play back or eject the recorded disc, press [T-SET]first, then select the recorded title and press [PLAY B], or [OPEN/CLOSE A] to remove the disc.

•If both DVD and VCR are timer programmed, you cannot use any functions for either unit during timer standby or timer recording. If you want to use functions other than

recording under such condition, cancel timer recording by pressing [T-SET]during timer standby or stop recording by pressing [STOP C] on the front panel during timer recording.

•To cancel the timer standby mode, press [T-SET].

•When the starting and the ending time are the same, the length of the recording will be set for 24 hours. When the disc or cassette tape becomes full during the recording, the unit turns itself off.

•When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

•If the starting time is earlier and the ending time is later than the current time, the recording will start right after you turn the power off.

•The timer recording for digital TV cannot record any audio language other than English.

•The timer recording cannot be performed in DVD and VCR at the same time. If you set 2 programming with the same channel and time in both devices, the program with a lower program number will be recorded.

•The timer recording for digital TV cannot record any audio language other than English.

Disc Connections Basic Setup Management Recording

The Priority of Overlapped Settings

•Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap.

•When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.

•When 2 or more timer programs have the same start time, the program set first will be given priority.

•A timer recording of lower priority will be canceled or start from the middle.

•Check the overlapped timer programmings and change the priority if necessary.

When the starting time is the same:

A program set previously (PROG. A) has priority.

PROG. A

 

 

 

 

 

 

 

 

PROG. B

 

 

 

 

 

 

 

 

actual

 

 

 

 

PROG. A

 

 

PROG. B

recording

 

 

 

 

 

 

 

The first 2 minutes (at the longest) will be

cut off.

Function Playback Editing Setup

Note for DVD recording

•When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off.

•If the cut-off portion comes up to 3 minute or more, this program will be displayed with error number E40 in the timer programming list.

When the end time of the programming currently being recorded and the start time of the subsequent program are same:

The beginning of the PROG. B may be cut off.

PROG. A

 

 

PROG. B

 

 

actual

PROG. A

PROG. B

recording

 

 

The first 2 minutes (at the longest) will be cut off.

VCR Functions Others Español

EN 49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents ZV450TT8 Laser Safety PrecautionsMake your contribution to the environment RADIO-TV InterferencePrecautions Important SafeguardsSupplied Accessories Installation LocationAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningCleaning the cabinet Maintenance ServicingCleaning discs Cleaning the disc lensContents Features DVD-R FeaturesColor Systems Unplayable DiscsRegion Codes DVD-VIDEO CD-DA CD-RWFront Panel Functional Overview21 2019 18 17 13 12 11 10 Rear Panel Functional Overview11 10 Installing the Batteries in the Remote Control Remote ControlUsing a Remote Control Open the cover Insert batteriesDTV/TV button DVD/VCR Display Message Front Panel DisplayDB HDD Current status of the unitAntenna Cable Connection Disconnect the power cord of your TV from the AC outletRF Modulator Connection Plug in the power cords of the devices to the AC outletSupplied cables used in this connection are as follows Introduction With this setupThis unit Connection to a TVVideo OUT Audio OUT DVD Video OUT Component Video OutputConnection to AN Audio System SettingAudio Audio OUTVCR mode Thevcr / DVD Recorder SwitchingOn-Screen Display / Menu Setup VCR Functions Others EspañolOFF File Name InformationGuide to ON-SCREEN Displays and Menus DVD mode Disc Information / MenuMain Menu Connections Basic SetupDisc Management Recording Playback Press Power Initial SettingPress Enter to activate Clock AirUse K / L to select Auto Preset, then press Enter Channel SettingWhen scanning is over, press Setup to exit Auto Channel ScanUse K / L to select Manual Preset, then press Enter Channel SettingAdding / Deleting Channels Delete Press Setup to exitAuto Clock Setting Setting the ClockUse K / L to select Auto Clock Setting, then press Enter Press Setup to exit and turn off the unitManual Clock Setting Setting the ClockDaylight Saving Time Switching Analog Mode Digital Mode Tuner SettingsChannel Selection Function Editing Setup VCR Functions Others Español Tuner SettingsSelecting TV Audio Press Audio to cycle through available audio languagesUse K / L to select TV Audio Select, then press Enter Selecting TV Audio cont’dSAP, then press Enter Use K / L to select Stereo orUse K / L to select Display, then press Enter DTV Closed CaptionUse K / L to select CC Style, then Use K / L to select DTV CC, thenThen press Enter Closed Caption StyleUse K / L to select the item Switch the setting for each item youWant to set, then press Enter Choosing the Recording Format of a Brand-New DVD-RW Formatting a DiscFormatting is completed.100% is indicated Insert a brand-new disc. Formatting will startReformatting a Disc Manually Formatting a DiscUse K / L to select Format, then press Enter Use K / L to select Yes, then press EnterSetting Aspect Ratio for Video Mode Recording Setting for Auto ChapterPress Setup to exit Preparing a DiscOFF ON, then press ENTER. e.g. VR mode DVD-RW Setting a Disc to ProtectTo cancel the disc protect Disc will be protectedAuto Finalizing General Setting menu will appearPlaying the Discs in Other DVD Players Press Setup Use K / L to select DVD Menu, then press EnterFinalizing a Disc Use K / L to select Finalize, then press Enter42 EN Recording Speed Information on DVD RecordingRestrictions on Recording VideoPress REC Speed to select a recording speed Press OPEN/CLOSE a to close the disc trayNumber buttons to select a desired Channel to record It may take awhile to load Disc completelyPress Stop C to stop recording Disc Connections Basic Setup Management RecordingPress REC/OTR to start recording Playback EditingUse K / L to enter the date, then press B Timer RecordingTimer Recording Press T-SET To stop the timer recording in processWill disappear on the front panel display Priority of Overlapped Settings Hints for Timer RecordingFunction Playback Editing Setup VCR Functions Others EspañolConnection to an External Device Settings for AN External DeviceExternal device If you want to use S-VIDEO in jack, select VideoRecording from an External Device Settings for AN External DevicePress Stop C / Stop C/EJECT a on the unit to stop recording It takes a while to load DiscUse K / L to select Dubbing Mode, then press Enter Dubbing ModeUse K / L to select Recording, then press Enter Make sure that the disc is recordable. Refer toPress DVD Dubbing ModePress Dubbing Press Stop C to stop the recordingInformation on Playback Structure of Disc ContentsSome discs may start playback automatically Direct PlaybackPlayback from the Title List Basic PlaybackPress Stop C once to stop playback Use K / L to select Play FromPlayback on Follow steps 1 to 2 in DirectOr track/file, then press Enter Press OPEN/CLOSE a to closePause Using the Title / Disc MenuKodak Picture CD Resume Playback Special PlaybackFast Forward / Fast Reverse Playback Skipping TV Commercials During PlaybackRapid Playback Special PlaybackStep by Step Playback Slow Forward / Slow Reverse PlaybackZoom Marker SettingDVD-video Using Display Using Skip j / SkipSearch Title/Chapter SearchTime Search SearchAudio CD Random Playback Repeat PlaybackYou can program the disc to play back in your desired order Program PlaybackLarge-size Jpeg files take a few moments to be displayed Repeat this step until you program all the desired tracksSwitching Audio Soundtrack Switching SubtitlesSwitching Camera Angles Switching Virtual Surround SystemReducing Block Noise EnterGuide to a Title List Information on Disc EditingAfter the disc is fully recorded Deleting TitlesDisc Management Recording Press DVD first Deleting TitlesUse K / L/ s / B to select a desired Title, then press EnterAdding Titles to a Playlist CREATING/DELETING PlaylistUse K / L to select Add To Playlist, then press EnterCREATING/DELETING Playlist Press DVD first. Press SetupErasing All Playlist Use K / L to select Yes, then press ENTER.DVD MenuPutting Names on Titles Editing DiscsPrevious input mode automatically Mode automaticallyEditing Discs Putting Names on Titles cont’dDisc Connections Basic Setup Management Recording Playback Setting or Clearing Chapter MarksUse Skip H / G Press ReturnDeleting a Part of a Title VR mode DVD-RW playlistUse K / L to select Scene Delete, then press Enter Cursor will move to PreviewThen press Enter Use K / L to select Delete then press EnterPart of the title is deleted Press DVD first Stop mode, press TOP Menu Dividing a TitlePress Return or Stop C to exit Combining, then press Enter Combining TitlesOthers To protect a whole disc VR mode DVD-RW only Setting or Releasing the Title ProtectionConfirm the indication OFF ON. Press Enter again Press Return and then Return or Stop C to exitUse K / L to select Chapter Mark Setting or Clearing All Chapter Marks at OnceUse K / L to select the desired interval, then press Enter If you select OFF at , all the chapter marks are erasedContents List of SettingsEspañol List of SettingsPlayback SetupsUse K / L to select a desired item, then press Enter Press Stop C if you are playing back a discParental Lock Default All SetupsPlayback cont’d FunctionAudio Language Default Original Disc Menu Language Default EnglishAudio Out PCMAngle Icon Default on Subtitle Language Default OFFStill Mode Default Auto Display When you finish with setting, press Setup to exitRefer to 1 to 5 on page 89 and set the selected item ForScreen Saver Default 10 minutes OSD Language Default EnglishFL Dimmer Default Bright Display cont’dSelected item VideoRefer 1 to 2 on page 91 and set For 3 , refer to Connection to an ExternalTV Aspect Default 43 Letter Box Progressive Default OFFVideo cont’d Select Yes using K / L , then press Enter Reset AllSelect Yes again using K / L , then press Enter Reset the setting to defaultPress VCR first Before recording, make sure VCR FunctionsRecording speed Press REC/OTR to begin the recordingYou cannot pause the one-touch timer recording One-touch Timer Recording OTRUsing REC/OTR or Stop C VCR FunctionsOther Operations Symptom TroubleshootingRemedy SETSymptom Remedy TroubleshootingPress OPEN/CLOSE a Repairing process MAY not work OPEN/CLOSE a to take out the disc. The disc canceled duringREC/OTR Error message Cause Solution Frequently Asked Questions Language Code Language CodeGlossary General SpecificationsRecording TunerDiscos no Reproducibles EspañolCódigos de Región Disco simple de video VSDIntroduction Connections EspañolPresione Enter para activar Ajste Manual de Reloj Presione PowerPresione DVD Con el rótulo aupntando hacia arribaConfigure una programación del Presione Timer ProgTemporizador Presione EnterTel Customer ServiceE9H11UD 1VMN23550
Top Page Image Contents