FUNAI ZV450TT8 Maintenance Servicing, Cleaning the cabinet, Cleaning discs, IR signal check

Page 5

PRECAUTIONS

Maintenance

Servicing

•Please refer to relevant topics on “TROUBLESHOOTING” on pages 96-100 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

•If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Note

•Remember to read the instructions along with the video head cleaner before use.

•Clean video heads only when problems occur.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

•With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

•With a digital camera (including built-in

camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Disc

Introduction Connections Basic Setup Management Recording

Disc handling

•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

Auto head cleaning

•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

•Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.

1.Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner.

2.If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center.

© 2007 Funai Electric Co., Ltd.

“Kodak Picture CD COMPATIBLE” is a trademark of Eastman Kodak Company.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allow- ing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs.

Function Playback Editing Setup VCR Functions

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

EN 5

Others Español

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ZV450TT8 Laser Safety PrecautionsMake your contribution to the environment RADIO-TV InterferencePrecautions Important SafeguardsSupplied Accessories Installation LocationAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningCleaning the cabinet Maintenance ServicingCleaning discs Cleaning the disc lensContents Features DVD-R FeaturesColor Systems Unplayable DiscsRegion Codes DVD-VIDEO CD-DA CD-RW21 2019 18 17 13 12 11 10 Functional OverviewFront Panel 11 10 Functional OverviewRear Panel Installing the Batteries in the Remote Control Remote ControlUsing a Remote Control Open the cover Insert batteriesDTV/TV button DVD/VCR Display Message Front Panel DisplayDB HDD Current status of the unitAntenna Cable Connection Disconnect the power cord of your TV from the AC outletSupplied cables used in this connection are as follows Plug in the power cords of the devices to the AC outletRF Modulator Connection Introduction With this setupThis unit Connection to a TVVideo OUT Audio OUT DVD Video OUT Component Video OutputConnection to AN Audio System SettingAudio Audio OUTVCR mode Thevcr / DVD Recorder SwitchingOn-Screen Display / Menu Setup VCR Functions Others EspañolOFF File Name InformationGuide to ON-SCREEN Displays and Menus DVD mode Disc Information / MenuDisc Management Recording Playback Connections Basic SetupMain Menu Press Power Initial SettingPress Enter to activate Clock AirUse K / L to select Auto Preset, then press Enter Channel SettingWhen scanning is over, press Setup to exit Auto Channel ScanAdding / Deleting Channels Channel SettingUse K / L to select Manual Preset, then press Enter Delete Press Setup to exitAuto Clock Setting Setting the ClockUse K / L to select Auto Clock Setting, then press Enter Press Setup to exit and turn off the unitDaylight Saving Time Setting the ClockManual Clock Setting Channel Selection Tuner SettingsSwitching Analog Mode Digital Mode Function Editing Setup VCR Functions Others Español Tuner SettingsSelecting TV Audio Press Audio to cycle through available audio languagesUse K / L to select TV Audio Select, then press Enter Selecting TV Audio cont’dSAP, then press Enter Use K / L to select Stereo orUse K / L to select Display, then press Enter DTV Closed CaptionUse K / L to select CC Style, then Use K / L to select DTV CC, thenThen press Enter Closed Caption StyleWant to set, then press Enter Switch the setting for each item youUse K / L to select the item Choosing the Recording Format of a Brand-New DVD-RW Formatting a DiscFormatting is completed.100% is indicated Insert a brand-new disc. Formatting will startReformatting a Disc Manually Formatting a DiscUse K / L to select Format, then press Enter Use K / L to select Yes, then press EnterSetting Aspect Ratio for Video Mode Recording Setting for Auto ChapterPress Setup to exit Preparing a DiscOFF ON, then press ENTER. e.g. VR mode DVD-RW Setting a Disc to ProtectTo cancel the disc protect Disc will be protectedAuto Finalizing General Setting menu will appearPlaying the Discs in Other DVD Players Press Setup Use K / L to select DVD Menu, then press EnterFinalizing a Disc Use K / L to select Finalize, then press Enter42 EN Recording Speed Information on DVD RecordingRestrictions on Recording VideoPress REC Speed to select a recording speed Press OPEN/CLOSE a to close the disc trayNumber buttons to select a desired Channel to record It may take awhile to load Disc completelyPress Stop C to stop recording Disc Connections Basic Setup Management RecordingPress REC/OTR to start recording Playback EditingUse K / L to enter the date, then press B Timer RecordingTimer Recording Will disappear on the front panel display To stop the timer recording in processPress T-SET Priority of Overlapped Settings Hints for Timer RecordingFunction Playback Editing Setup VCR Functions Others EspañolConnection to an External Device Settings for AN External DeviceExternal device If you want to use S-VIDEO in jack, select VideoRecording from an External Device Settings for AN External DevicePress Stop C / Stop C/EJECT a on the unit to stop recording It takes a while to load DiscUse K / L to select Dubbing Mode, then press Enter Dubbing ModeUse K / L to select Recording, then press Enter Make sure that the disc is recordable. Refer toPress DVD Dubbing ModePress Dubbing Press Stop C to stop the recordingInformation on Playback Structure of Disc ContentsSome discs may start playback automatically Direct PlaybackPlayback from the Title List Basic PlaybackPress Stop C once to stop playback Use K / L to select Play FromPlayback on Follow steps 1 to 2 in DirectOr track/file, then press Enter Press OPEN/CLOSE a to closeKodak Picture CD Using the Title / Disc MenuPause Resume Playback Special PlaybackFast Forward / Fast Reverse Playback Skipping TV Commercials During PlaybackRapid Playback Special PlaybackStep by Step Playback Slow Forward / Slow Reverse PlaybackDVD-video Marker SettingZoom Using Display Using Skip j / SkipSearch Title/Chapter SearchAudio CD SearchTime Search Random Playback Repeat PlaybackYou can program the disc to play back in your desired order Program PlaybackLarge-size Jpeg files take a few moments to be displayed Repeat this step until you program all the desired tracksSwitching Audio Soundtrack Switching SubtitlesSwitching Camera Angles Switching Virtual Surround SystemReducing Block Noise EnterGuide to a Title List Information on Disc EditingDisc Management Recording Deleting TitlesAfter the disc is fully recorded Press DVD first Deleting TitlesUse K / L/ s / B to select a desired Title, then press EnterAdding Titles to a Playlist CREATING/DELETING PlaylistUse K / L to select Add To Playlist, then press EnterCREATING/DELETING Playlist Press DVD first. Press SetupErasing All Playlist Use K / L to select Yes, then press ENTER.DVD MenuPutting Names on Titles Editing DiscsPrevious input mode automatically Mode automaticallyEditing Discs Putting Names on Titles cont’dDisc Connections Basic Setup Management Recording Playback Setting or Clearing Chapter MarksUse Skip H / G Press ReturnDeleting a Part of a Title VR mode DVD-RW playlistUse K / L to select Scene Delete, then press Enter Cursor will move to PreviewPart of the title is deleted Use K / L to select Delete then press EnterThen press Enter Press Return or Stop C to exit Dividing a TitlePress DVD first Stop mode, press TOP Menu Others Combining TitlesCombining, then press Enter To protect a whole disc VR mode DVD-RW only Setting or Releasing the Title ProtectionConfirm the indication OFF ON. Press Enter again Press Return and then Return or Stop C to exitUse K / L to select Chapter Mark Setting or Clearing All Chapter Marks at OnceUse K / L to select the desired interval, then press Enter If you select OFF at , all the chapter marks are erasedContents List of SettingsEspañol List of SettingsPlayback SetupsUse K / L to select a desired item, then press Enter Press Stop C if you are playing back a discParental Lock Default All SetupsPlayback cont’d FunctionAudio Language Default Original Disc Menu Language Default EnglishAudio Out PCMStill Mode Default Auto Subtitle Language Default OFFAngle Icon Default on Display When you finish with setting, press Setup to exitRefer to 1 to 5 on page 89 and set the selected item ForScreen Saver Default 10 minutes OSD Language Default EnglishFL Dimmer Default Bright Display cont’dSelected item VideoRefer 1 to 2 on page 91 and set For 3 , refer to Connection to an ExternalVideo cont’d Progressive Default OFFTV Aspect Default 43 Letter Box Select Yes using K / L , then press Enter Reset AllSelect Yes again using K / L , then press Enter Reset the setting to defaultPress VCR first Before recording, make sure VCR FunctionsRecording speed Press REC/OTR to begin the recordingYou cannot pause the one-touch timer recording One-touch Timer Recording OTRUsing REC/OTR or Stop C VCR FunctionsOther Operations Symptom TroubleshootingRemedy SETPress OPEN/CLOSE a TroubleshootingSymptom Remedy REC/OTR OPEN/CLOSE a to take out the disc. The disc canceled duringRepairing process MAY not work Error message Cause Solution Frequently Asked Questions Language Code Language CodeGlossary General SpecificationsRecording TunerDiscos no Reproducibles EspañolCódigos de Región Disco simple de video VSDIntroduction Connections EspañolPresione Enter para activar Ajste Manual de Reloj Presione PowerPresione DVD Con el rótulo aupntando hacia arribaConfigure una programación del Presione Timer ProgTemporizador Presione EnterTel Customer ServiceE9H11UD 1VMN23550
Top Page Image Contents