FUNAI ZV450TT8 owner manual Troubleshooting, Symptom Remedy, Press OPEN/CLOSE a

	TROUBLESHOOTING
Symptom	Remedy
There is no picture.	• If the main menu appears on the TV screen, press [RETURN ] to exit.

•Check if the progressive scan mode is set correctly according to your TV (page 91).

	Picture noise appears.	• Clean the disc with a cleaning cloth.
	There is no sound.	• If you are using DIGITAL AUDIO OUTPUT (COAXIAL) jack, check the setting
		in “Audio Out” (page 86).
		• Clean the disc with a cleaning cloth.
	Sound is noisy.	• Clean the disc with a cleaning cloth.
	No DTS sound is output.	• This unit is not compatible with DTS sound.
	The disc does not play back.	• No disc is inserted.
		• A blank disc is inserted.
		• The disc is upside down. Insert the disc with the labeled side facing up.
		• The disc is not correctly inserted.
		• The unit cannot play back certain discs (such as a CD-ROM) (page 9).
		• The region code on the DVD-video does not match the unit (page 9).
		• Moisture has condensed inside the unit. Remove the disc and leave the
		unit turned on for about 2 hours until the moisture evaporates (page 4).
		• If the disc was recorded on another recorder, the unit cannot play back
		the disc if it was not finalized.
	Discs recorded on this unit cannot be	• If you are using DVD-RW/-R, please ensure you finalized the disc after
D	played back on other DVD players.	recording (pages 41-42).
	The disc does not start playback from	• Resume playback was activated (page 59). Press [STOP C] twice.
V	the beginning.	• You have inserted a disc whose title menu or DVD menu automatically
D		appears on the TV screen when it is first inserted.
	The unit starts playing back the disc	• The DVD-video features an auto playback function.
	automatically.
	Some functions such as stop, search,	• Depending on the disc, you may not be able to do some of the
	or slow-motion playback cannot be	operations. Refer to the instruction manual supplied with the disc.
	performed.
	The language for the sound track	• The title does not have the multilingual audio tracks.
	cannot be changed.	• The DVD-video prohibits the changing of the language for the sound
		track.
	The subtitle language cannot be	• Multilingual subtitle are not recorded on the DVD-video.
	changed or turned off.
	The angles cannot be changed.	• Multi-angles are not recorded on the DVD-video being played back.
		• The angle-change operation is whenever possible as long as the disc
		contains a multi-angle portion. Actual change will be performed when
		the portion has come up.
		• The DVD-video prohibits changing angles.
		• Try changing the angle using the DVD-video’s menu.
	Recording does not stop immediately	• It may take a few seconds for the unit to input disc data before
	after you press [STOP C].	recording stops.
	The disc tray does not open when you	• It may take a few seconds for the disc tray to open after you have
	press [OPEN/CLOSE A].	recorded or edited a disc. This is because the unit is adding disc data to
		the disc.

EN 97

DiscFunction Introduction Connections Basic Setup Management Recording Playback Editing Setup VCR Functions Others Español