LOREX Technology SG7965 instruction manual Timer Recording, Timer REC Mode Menu, DAY option

TIMER RECORDING

MAIN MENU

MENU

VCR SET UP

REC MODE SET UP

GTIMER REC SET UP ALARM SET UP POWER FAIL RECALL LANGUAGE ENGLISH

(MOVE) (SELECT) (MENU)

TIMER REC MODE MENU

SET DAY START END SPD

G	OFF	- - - - -- - :	- -- - :	6
	OFF	- - - - -- - :	- -- - :	6
	OFF	- - - - - : - -	- - : - -	6
	OFF	- - - - - : - -	- - : - -	6
	OFF	- - - - - : - -	- - : - -	6
	OFF	- - - - - : - -	- - : - -	6
	OFF	- - - - - : - -	- - : - -	6
	OFF	- - - - - : - -	- - : - -	6

(UP) (DOWN) (SELECT) (MENU)

This VCR can be programmed to record up to 8 programs. For programmed recording, the timer must be set for the starting and ending times.

PREPARATION

•Make sure a tape is in the VCR and the safety tab is in place otherwise the tape will be automatically ejected.

•Turn on the power of both the VCR and the monitor.

•If you have a TV instead of monitor, turn on the power of TV and then set the TV’s source selector to VIDEO.

1 Press MENU and the main menu will appear.

2 Press the MOVE to choose the TIMER REC SET UP item.

3 Press SEL to enter the TIMER REC SET UP menu.

The TIMER REC SET UP menu will appear.

4 Press SEL to select the SET item then press DOWN or UP to choose ON or OFF. Activated Timer Recording only when the SET item is set to “ON”.

SET	DAY START		END	SPD
G OFF	SUN 10	: 30	11 : 30	6
OFF	- - - - -	: - -	- - : - -	6
OFF	- - - - -	: - -	- - : - -	6
OFF	- - - - -	: - -	- - : - -	6
OFF	- - - - -	: - -	- - : - -	6
OFF	- - - - -	: - -	- - : - -	6
OFF	- - - - -	: - -	- - : - -	6
OFF	- - - - -	: - -	- - : - -	6

(UP) (DOWN) (SELECT) (MENU)

NOTES:

•If you want to stop record- ing during the Time

5 Press SEL to move to next item and then set the next items (day, start time, end time recording hour) by using UP, DOWN and SEL buttons.

DAY option

SUN~SAT: Same time once a week.

M-F or S-S: Same time during Monday ~ Friday or Saturday ~ Sunday

DLY: Same time(s) every day

6 Press MENU when finished. Press MENU repeatedly to exit menu screen.

RECORDING

recording, press STOP/EJECT button

more than 3 seconds.

•If you press TIMER button, the Time Lapse’s power is turned off. After finishing

Time recording, the Time Lapse’s power is turned off again.

If you are finished programming and you want to set the VCR to record the programs you have entered. A) MAKE SURE

YOU HAVE INSERTED A TAPE INTO THE VCR. B) YOU MUST PRESS TIMER BUTTON BEFORE IT WILL RECORD ANY TIMER PROGRAMS (TIMER appears). The VCR is now

set to record the preset programs.

23