ALARM RECORDING
MAIN MENU
MENU
VCR SET UP
REC MODE SET UP
TIMER REC SET UP
GALARM SET UP POWER FAIL RECALL LANGUAGE ENGLISH
(MOVE) (SELECT) (MENU)
ALARM SET UP
ALARM SET UP |
|
G REC MODE | 6H |
DURATION | 1 MIN |
BUZZER | ON |
ALARM READY | ON |
ALARM RECALL |
|
(MOVE) (SELECT) (MENU)
Alarm recording will start when the external alarm signal is input. This function is available when the VCR is connected to an external device having an alarm output terminal.
Things to know before starting
•Before alarm recording, refer to page 12 for alarm record connection.
•Make sure a tape is in the VCR and the safety tab is in place.
1 Press MENU and the main menu will appear
2 Press the MOVE to choose the ALARM SET UP item and then press SEL.
The ALARM SET UP menu will appear.
3 Press the MOVE to choose the REC MODE item. Press SEL repeatedly to choose recording hours.
The recording mode is changed as below.
OFF ➔ 6H ➔ 18H ➔ 30H
4 Press MOVE to choose the DURATION item. Press SEL repeatedly to choose the desired duration of recording.
The duration of recording is changed as below.
30 SEC ➔ 1 MIN ➔ 3 MIN ➔ 5 MIN ➔ 10 MIN ➔ T.END ➔ AUTO1 ➔ AUTO2
•If you choose the T.END, alarm recording continues until tape ends.
•If you choose the AUTO1, alarm recording continues until the alarm reset signal is input.
•If you choose the AUTO2, alarm recording continues while the alarm signal is input.
RECORDING
25