35
¢ | ¢ |
q
Á | 1 |
|
|
|
|
|
|
|
|
|
|
Receiving NICAM Stereo
And Bilingual Programmes
Your recorder is equipped with a Digital stereo sound decoder (NICAM), making reception of stereo and bilingual broadcasts possible.
When the recorder is tuned to a different station, the type of broadcast being received will be displayed on the TV screen for a few seconds.
1 2 3
4 5 6
REW
AUDIO
FF
MONITOR
Type of Broadcast |
| |
Being Received | ||
| ||
|
| |
Regular Monaural | (none) | |
NICAM Stereo | ST NICAM | |
NICAM Bilingual | BIL NICAM | |
NICAM Monaural | NICAM | |
|
|
NOTE:
"O.S.D." must be set to "ON" or the
7/ 8 9
0
2
● To listen to a stereo programme, press AUDIO MONITOR
until "HI FI L |
|
| R" appear on the TV screen. |
|
|
● To listen to a bilingual programme, press AUDIO MONITOR
4 | until either "HI FI L |
| " or "HI FI R" appears on the TV | |
|
|
|
| |
| screen (as required). | |||
| ● To listen to the Standard (regular monaural) audio while | |||
| receiving a NICAM broadcast, press AUDIO MONITOR until | |||
| "NORM" appears on the TV screen. |
1 | 3 | Á | FF |
REW |
|
| |
7 | 8 |
| |
¦ |
| ||
1 | 4 | ¢ |
|
|
| ||
3 |
|
|
|
To Record NICAM Stereo
And Bilingual Programmes
The NICAM audio programme will be recorded on the
Tape Position Indicator
NOTES:
●If the quality of stereo sound being received is poor, the broadcast will be received in monaural with better quality.
●Before playing back a programme recorded in stereo, or a bilingual programme, refer to "Soundtrack Selection" (☞ pg. 16).
The tape position indicator appears on screen when, from the Stop mode, you press FF, REW or perform an Index Search. The position of “5” in relation to “0” (beginning) or “+” (end) shows you where you are on the tape.
”O.S.D.” (☞ pg. 34) must be set to “ON”, or the indicator will not appear.
0
Beginning
3
++ +
1:23:45 REMAIN 2:35
End
NOTE:
Depending on the type of tape used, there may be times when the indication is not correct.