4INSTALLINGYOURNEWRECORDER
Basic Connections
Back of TV
Aerial connector
21-pin AV input connector (SCART)
It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-
PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.
1 |
| CHECK CONTENTS |
|
|
| Make sure the package contains all of the accessories |
| ||
| listed in “Specifications” (☞ pg. 49). |
| ||
2 |
| SITUATE RECORDER |
|
|
| Place the recorder on a stable, flat surface. |
| ||
|
| CONNECT RECORDER TO |
|
|
3 |
| TV |
| |
| The connection method you use depends on the type of |
| ||
| TV you have. |
| ||
|
|
|
| |
| RF CONNECTION |
| ||
|
| ● To Connect To A TV With NO |
| |
|
| connector (SCART) . . . |
| |
|
| a– Disconnect the TV aerial cable from the TV. |
| |
|
| b– Connect the TV aerial cable to the ANT. IN jack |
| |
|
| on the rear panel of the recorder. |
| |
|
| c– Connect the provided RF cable between the RF |
| |
|
| OUT jack on the rear panel of the recorder and the |
| |
|
| |||
|
| TV’s aerial connector. |
| |
|
| Before operating the recorder, make sure the TV’s |
| |
|
| channel is set to the VIDEO channel (☞ pg. 6). | 4 | |
|
| AV CONNECTION | ||
|
| ● To Connect To A TV with | ||
|
| (SCART) . . . | ||
|
| a– Connect the aerial, recorder and TV as per “RF |
| |
|
| CONNECTION”. |
| |
|
| b– Connect an optional SCART cable between the |
| |
|
| AV1 IN/OUT socket on the rear panel of the |
| |
|
| recorder and the TV’s |
| |
|
| (SCART). |
| |
|
| Before operating the recorder, make sure the TV is set to |
| |
|
| the VIDEO (or AV) mode. |
| |
|
|
|
|
|
RF Cable (provided)
Mains Power
Cord
Mains outlet
CONNECT RECORDER TO MAINS
Plug the end of the mains power cord into a mains outlet.