JVC HR-J935EK Access CH. SET Mode, Menu, Select Mode, Select Position, Input Channel, Information

USINGTHECONFIRMATIONSCREEN43

					8
• •	•	• •	• •	•	• •
•		•	•		•
• •		• •	• •		• •

		CH SET
			STORE
		2
	1	2	3
NUMBER	4	5	6
	7	8	9
		0

3 OK

1

PUSH JOG

Storing Channels Manually

Store channels that were not stored during Auto Channel Set.

	ACCESS CH. SET MODE
1	MENU
	Press and hold CH SET for more than 2 seconds. The
	Ch. Set Mode menu appears.
2	SELECT MODE
	Press PUSH JOG%Þ to select “MANUAL CH SET”,
	then press OK. The Confirmation screen appears.
3	SELECT POSITION
	Press PUSH JOG%Þ%%until an open position in
	which you want to store a channel begins blinking,
	then press OK. The Manual Ch. Set screen appears.
4	INPUT CHANNEL
	The number "21" appears blinking to the right of "CH".
	Press the NUMBER keys to input the preset number of
	the channel you want to store.
	● For fine tuning adjustment, press PUSH JOG%until
	the item under "CH" begins blinking, then press
	PUSH JOG%Þ. While tuning, “F+” or “F–” appears.
	ENTER NEW CHANNEL
5	INFORMATION
	Press OK or STORE, and the Confirmation screen appears.
	● Repeat steps 3 through 5 as necessary.
	CLOSE CONFIRMATION
6	SCREEN
	Press CH SET.
	● To input the station name, see page 45.
	● To change positions, see page 44.