JVC HR-J758EH, HR-DD858EH specifications Skip Over Unwanted, Sections, Activate Instant Review

Index Search
Your recorder automatically marks	£ 2
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

PressÞor%(ª or £). “ª 1” or “£ 1” is
displayed on screen and search begins in the corre-
1 sponding direction.
● To access index codes 2 through 9, pressÞor%
repeatedly until the correct index number is displayed.
Ex.: To locate the beginning of B from the current
position, pressÞtwice.
To locate the beginning of D from the current
position, press%once.
	Current position
	A	B		C	D	E F
	–2		–1	1	2	3
			%		%
						Index number

●When the specified index code is located, playback begins automatically.

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTES:

● To return to normal playback during a Skip Search, press PLAY.

● For HR-DD858E/EH Owners:

● It will be 9x normal playback speed with TimeScan (☞ pg. 18) during a Skip Search.

● Skip Search does not work properly during NTSC playback.

EN15

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTES:

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number of recorded programmes will not be displayed on the front display panel after Auto Satellite Prog recording (☞ pg. 32).

Next Function Memory

You can set your recorder's power to go off automatically after the tape is fully rewound. Before starting, make sure the recorder is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press within 2 seconds.