JVC HR-J758EH Express Timer Programming, Start Time, Enter Programme Stop, Enter Programme Date

28ENTIMERRECORDING(cont.)

Express Timer Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

– –:– –

If you don’t know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

	ACCESS SHOWVIEW
	SCREEN
1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
Press START +/–. (If you’re				– P1 –
	just starting out, “P1”
			START			STOP
2 appears.)
			– –:– –	=		– –:– –
			SP		VPS/PDC OFF
			DATE			TV PROG
			– –.– –				– –
		[+/–] =
		[PROG] : EXIT

PS/PDC

START+/–

1

4

7

2

5

DAILY3

6

9

2

WEEKLY

4

TV PROG+/–

The front display panel looks like this:

SP

ENTER PROGRAMME
START TIME
Press START +/– to enter	– P1 –
3 the time you want

PROG

1	STOP+/–	DATE+/
		–
		SP/LP

recording to start.		START			STOP
		21:00	=		– –:– –
● Press and hold START		SP		VPS/PDC OFF
+/– to move in 30-		DATE			TV PROG
minute increments, or
		– –.– –				– –
press and release	[+/–] =
repeatedly to move 1

3 OK

[PROG] : EXIT

minute at a time.

The front display panel looks like this:

SP

		ENTER PROGRAMME STOP
4		TIME
	Press STOP +/– to enter the time you want recording to
		stop.
		● Press and hold STOP +/– to move in 30-minute
		increments, or press and release repeatedly to move 1
		minute at a time.

5	ENTER PROGRAMME DATE
	Press DATE +/–. (The current date appears on screen.
	The date you enter appears in its place.)