JVC HR-DD858EH, HR-J758EH Colour System Set, About Ntsc Playback, OK or%, SYSTEM, then

10EN

INFORMATIONONCOLOURSYSTEM

Colour System Set

– –:– –

1 2 3

2

4 5 6

7 8 9

0 4

1

OK

MENU

NOTES:

About NTSC Playback

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

●The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●The counter and tape remaining time readings will be incorrect.

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

●Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this recorder. Follow the procedure below to select the appropriate colour system.

*SECAM signals will be recorded as MESECAM on this recorder; MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatible PAL video cassette recorder.

TURN ON THE RECORDER

1 Press			.
		ACCESS MAIN MENU
		SCREEN
2 Press MENU.
		ACCESS MODE SET SCREEN
	Press %Þ to move the					MAIN MENU
		highlight bar (pointer) to
3 "MODE SET", then press						MODE SET
						AUTO CH SET
		OK or%.				MANUAL CH SET
						INITIAL SET
		● "REC LEVEL CTL"				REC LEVEL CTL
		appears only with the
		HR-DD858E and HR-
		DD858EH.				[5°] =
						[MENU] : EXIT
		SELECT COLOUR SYSTEM
4		MODE
	Press %Þ to move the					MODE SET
		highlight bar (pointer) to				AUTO TIMER	OFF
			SYSTEM", then
						O. S. D.	ON
		"COLOUR		%	to select the
		press OK or				B. E. S. T.	ON
		appropriate colour system.				AUTO SP=LP TIMER	OFF
						POWER SAVE	OFF
						AV2 SELECT	AV2
						COLOUR SYSTEM PAL/NTSC

a- PAL/NTSC: To record PAL signals, or play back a PAL or NTSC tape.

b- MESECAM: To record SECAM signals, or play back a MESECAM tape.

●"POWER SAVE" appears only with the HR-J758E and HR-DD858E.

RETURN TO NORMAL

SCREEN

5 Press MENU.