Connecting/
Using A
Decoder
EN43
The AV2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels.
SELECT INPUT MODE |
1 Set "AV2 SELECT" to "DECODER". (☞ pg. 37) |
CONNECT DECODER |
Connect your recorder's AV2 IN/DECODER connector |
2 to the decoder's Euroconnector using a |
TV Receiver |
RF Cable (provided)
TV
Aerial
Cable
|
| cable. |
|
|
|
3 |
| SET TUNER |
Perform the procedure as described in "When Receiving | ||
| A Scrambled Broadcast" on page 49. |
NOTE:
AV1 IN/OUT
AV2 IN/DECODER
Satellite antenna
Satellite tuner
Decoder
When Connecting A Satellite Tuner . . .
. . . if you don't have a decoder connect the satellite tuner directly to the video recorder's AV2 IN/DECODER connector.
. . . if you have a decoder, first connect the decoder to the decoder input of the satellite tuner, then connect the satellite tuner's output to the recorder's AV2 IN/DECODER connector. Refer to the instruction book for the satellite tuner and decoder.
. . . set "AV2 SELECT" to "AV2". (☞ pg. 37)
. . . to view a programme via the satellite tuner, select