JVC HR-S9500U manual Turn on DBS Receiver, Select DBS Receiver, Access DBS Receiver SET, Scan%

PRESS (5,°), THEN (OK)

PRESS (MENU) TO END

20ENINITIALSETTINGS(cont.)

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

POWER MENU

CH

OK

POWER

1 2 3

2

4 5 6

7 8 9

0 4

1

TIME SCAN

OK

MENU

Set DBS Receiver Output

Channel & DBS Receiver

Brand

		TURN ON DBS RECEIVER
		Select a channel other than channel 55, 100 or 205 on
1 your DBS receiver.
2		TURN ON THE VCR
		Press POWER.
		● Set the VCR to the channel (3 or 4 or F-1 or L-1) on
		which the signals from the DBS receiver are received.
		ACCESS MAIN MENU
		SCREEN
3 Press MENU.
		ACCESS INITIAL SET
4		SCREEN
		Press CH5° or TIME SCAN %Þ to move the highlight
		bar (arrow) to “INITIAL SET”, then press OK or TIME
	SCAN%.
		ACCESS DBS RECEIVER SET
		SCREEN
		Press CH5°or TIME		INITIAL SET
	SCAN %Þto move the
5 highlight bar (arrow) to			CLOCK SET
			LANGUAGE ENGLISH
	“DBS RECEIVER SET”, then		GUIDE CHANNEL SET
	press OK or TIME SCAN%.		CABLE BOX SET
			=DBS RECEIVER SET
			JLIP ID NO. SET
			SELECT WITH (5,°) AND (OK)
			PRESS (MENU) TO END
		SELECT DBS RECEIVER
		OUTPUT CHANNEL
		Your selection depends on	DBS RECEIVER SET
		how your DBS receiver is
6 connected to your VCR.
				OFF

If your DBS receiver is connected to your VCR using an RF connection . . .

. . . press CH 5° or TIME SCAN %Þ until the channel number

representing the DBS receiver's output (CH3 – CH4) appears on the screen.

If your DBS receiver is connected to your VCR's FRONT AUDIO/VIDEO IN connectors . . .

. . . press CH 5° or TIME SCAN %Þ until "ON F-1 (FRONT)" appears on the screen.

If your DBS receiver is connected to your VCR’s REAR AUDIO/VIDEO IN connectors . . .

. . . press CH 5° or TIME SCAN %Þ until "ON L-1 (REAR)" appears on the screen.