JVC HR-S9500U manual VCR Plus+ Timer Programming, EN Timer Recording, Enter Pluscode Number

46ENTIMERRECORDING

VCR Plus+

Timer

Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

	1	2	3
			2
NUMBER	4	5	6
	7	8	9
CANCEL		0	4
PROG.	1

TIME SCAN

OK

Timer recording allows you to program the VCR to automatically record a program that will be broadcast at some future time. The timer record function can be programmed using VCR Plus+ or Express Timer Programming up to 8 shows as far as a year in advance. (☞ pg. 46 or 50)

The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record and the VCR's timer will be automatically programmed. (The PlusCodes are the numbers next to the programs in most TV listings.)

1		LOAD A CASSETTE
		Make sure the record safety tab is present.
		● The VCR’s power comes on automatically.
2		ACCESS VCR PLUS+ SCREEN
		Press PROG. on the		VCR PLUS+
		remote control.
		● The clock must be set in
		order to access the VCR
		Plus+ screen. If you
			PRESS NUMBER KEY (0–9)
		haven’t set the clock, the
			PRESS (+/–) TO SET
		Main Menu screen		EXPRESS PROGRAMMING
		appears after an error	PRESS (PROG.) TO END
		message is displayed.
		Refer to page 8 for the Plug & Play procedure or page
		11 for the clock setting procedure.
3		ENTER PLUSCODE NUMBER
		Press the appropriate		VCR PLUS+
		NUMBER keys to enter the
		PlusCode number printed		123
		in the TV listings for the
		TV program you wish to
		record and press OK.
			PRESS NUMBER KEY (0–9)
		If the Guide Channel Set
		screen appears, go to step 4.				THEN (OK)
			PRESS (PROG.) TO END
		If the VCR Plus+ Program
		screen appears, go to step 5.
		● To make corrections, press CANCEL and input the
		correct PlusCode number.
		INPUT RECEIVING CHANNEL
4		NUMBER
		The Guide Channel		GUIDE CHANNEL SET
		Number, which is assigned
					GUIDE CH: 12
		to the TV or cable station
					VCR CH : –––
		for the PlusCode number
		that you entered in step 3,
	will appear automatically
			PRESS NUMBER KEY (0–9)
	on the Guide Channel Set
				OR (5,°), THEN (OK)
	screen. Input the number
			PRESS (PROG.) TO END
	of the channel on which
	the broadcast for the PlusCode number is received on
	the VCR or cable box using the NUMBER keys, CH 5°
	or TIME SCAN %Þ, then press OK.
		● The Guide Channel Set screen appears only when you
		input the PlusCode number of a station for which the
		Guide Channel number has not previously been set.
		● If you receive your channels with a cable box and if
		you have properly set your Controller, "CABLE CH"
		appears in place of "VCR CH". If not, refer to pages
		16 – 18.