FEnter channel position
Press PR
GSet tape speed
Press p to set the tape speed.
HAccess title edit screen
Press the number keys “1”. The Title Edit screen appears.
●You can access the Title Edit screen
only when “PROG. NAVIGATION” is set to “ON”. ( 16)
21:00 
22:00
25.121
[1] : TITLE
– P1 –
25.1221:00 PR.1
[&] : DELETE
[Y/U] : CURSOR 
: OK [PROG] : EXIT
24H Express Timer Programming
Before performing the following steps:
●Insert a cassette with the safety tab in place. The recorder will come on automatically.
●Select the appropriate colour system ( 16).
You can programme a timer recording that starts within 24 hours.
AAccess 24HR Express Timer Programme display
Push 24H EXPRESS #. “ 
” and start time start blinking on the display panel.
Programme start time indicator
I Enter programme title |
|
| – P1 – |
| ||||
Press the number keys and PUSH JOG e |
|
|
|
|
|
|
|
|
to enter characters, then press OK. For |
| 25.12 | W |
|
|
|
| |
|
|
|
|
|
|
|
| |
details, refer to “Entering character” on |
|
|
|
|
|
|
|
|
page 15. |
| |||||||
[&] : DELETE |
|
|
|
|
|
| ||
J Return to normal screen | [Y/U] : CURSOR |
|
|
|
| |||
| : OK | [PROG] : EXIT |
| |||||
|
|
| ||||||
After confirming all information is
correct, press PROG or OK. “PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears. If “PROGRAM OVERLAPPED” appears on the screen, see page 13.
●Repeat steps 1 – 10 for each additional programme.
KEngage recorder’s timer mode
Press #. The recorder turns off automatically and “#” appears on the display panel.
●To disengage the timer, press # again.
NOTES:
●To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 10, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the screen. Pressing the button again makes the corresponding indication disappear.
●You can programme this recorder to
extra programme, you must first cancel any unnecessary programmes ( 13).
●In case of a power failure after programming, the recorder’s memory backup keeps your selections (if the lithium battery is not exhausted).
BSet programme start time
Turn the JOG dial to the left or right. Then, push the JOG dial.
“
” and start time start blinking on the display panel.
Programme start time indicator
●One click stop of the JOG dial changes the time in
CSet programme stop time
Turn the JOG dial to the left or right. Then, push the JOG dial and channel number will start blinking.
Programme stop time indicator
●One click stop of the JOG dial changes the time in
DSet channel position
Turn the JOG dial to the left or right. Then, push the JOG dial and channel number will start blinking.
●You can cancel the setting at any time by pressing and holding the JOG dial for more than 3 seconds. Repeat from the step 2.
EEngage recorder’s timer mode
Press 24H EXPRESS #.
The recorder turns off automatically and “#” appears on the display panel.
— 12 —