Basic Connections
ACheck contents
Make sure the package contains all of the accessories listed in “Specifications” ( 22).
BSituate recorder
Place the recorder on a stable, horizontal surface.
CConnect recorder to TV
RF Connection
ADisconnect the TV aerial cable from the TV.
BConnect the TV aerial cable to the ANT. IN connector on the rear of the recorder.
CConnect the provided RF cable between the RF OUT connector on the rear of the recorder and the TV’s aerial connector.
AV Connection
If your TV is equipped with a AV Input Terminals connector, perform AV connection to improve picture quality during tape playback.
Aerial terminal
Back of TV
RF cable (provided)
AV cable
TV aerial cable
AConnect the aerial, recorder and TV as shown in the illustration.
BConnect an optional AV cable between the AUDIO OUT/ VIDEO OUT connector on the rear of the recorder and the
S-video Connection
(allows you to make the most of the
APerform “RF Connection” previously described.
B Connect the supplied |
OUT connector on the rear of the recorder and the |
input connector on the TV. |
Mains power cord
(not provided)
(MONO)
CConnect an audio cable between the AUDIO OUT connectors on the rear of the recorder and the audio input connectors on the TV.
●Even if you are using audio/video cables to connect your recorder to your TV, you must also connect it using the RF cable. This will ensure that you can record one show while watching another.
DConnect recorder to mains
Plug the mains power cord into a mains outlet.
Back of recorder
Mains outlet | AUDIO OUT/VIDEO OUT |
Connect the power plug to an AC outlet before installing the lithium battery. ( 2)
— 4 —