Reverse |
|
|
|
| Forward | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Reverse | Reverse | Reverse | Slow | Normal | Forward | |
| search | play | slow | motion | play | search | |
|
|
| motion |
|
|
|
|
1/6 | 1 | 2, 3, 5, 7 | |||||
|
|
|
|
|
|
|
|
BAdjust tracking manually
Press PR +/– to adjust tracking.
●To return to automatic tracking, press p on the remote control.
NOTE:
When a new tape is inserted, the recorder enters the automatic tracking mode automatically.
Repeat playback
Your video recorder can automatically play back the whole tape 100 times repeatedly.
When the tape is not running
Press 3 or 5.
Eject the tape
Press 0.
●You can also eject the cassette when the recorder is turned off.
Turn off the recorder
Press 1.
Playback Features
Index search
Your recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
— Activate Index Search
Press PUSH JOG w or e (2 or 6) on the remote control.
“2 1” or “6 1” is displayed on screen and search begins in the corresponding direction.
●To access index codes 2 through 9, press PUSH JOG w or e repeatedly until the correct index number is displayed.
Ex.:To locate the beginning of B from the current position, press PUSH JOG w twice. To locate the beginning of D from the current position, press PUSH JOG e once.
●When the specified index code
is located, playback begins automatically.
Manual tracking
Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR +/– buttons.
AOverride automatic tracking
Press p on the remote control to engage manual tracking.
AStart playback
Press 4.
BActivate repeat playback
Press 4 and hold for over 5 seconds, then release.
●The Play indicator (u) on the display panel blinks slowly.
●The tape plays 100 times automatically, and then stops.
CStop playback
●Press 8 at any time to stop playback.
NOTES:
●Pressing 4, 3, 5 or 9 also stops Repeat Playback.
●Repeat Playback is not possible with a PAL tape recorded in EP mode.
Next function memory
The Next Function Memory “tells” the recorder what to do after rewinding. Before continuing, ensure that the recorder is in the Stop mode.
a– For Automatic Start Of Playback After Tape Rewind...
...press 3, then press 4 within 2 seconds. b– For Automatic Power Off After Tape Rewind...
...press 3, then press 1 within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind...
...press 3, then press # within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer functions if the cassette’s record safety tab is removed.
Tape position indicator
The tape position indicator appears |
|
|
on screen when, from the Stop mode, |
|
|
you press 5, 3 or perform an |
|
|
Index Search. The position of “8” in |
|
|
relation to “0” (beginning) or “+” |
|
|
(end) shows you where you are on the |
|
|
tape. |
|
|
“O.S.D.” ( 16) must be set to | Beginning | End |
“ON”, or the indicator will not |
|
|
appear. |
|
|
NOTE:
Depending on the type of tape used, there may be times when the indication is not correct.
Skip search
— Skip over unwanted sections
Press 30 SEC 1 to 4 times during playback. Each press initiates a
NOTE:
Before return to normal playback during a Skip Search, press 4.
— 7 —