JVC HR-S6955EK manual Input Setting, For L-2 Input

Page 38

38

advanced features

L-2 INPUT Setting

The L-2 IN/DECODER connector accepts either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-2 INPUT to the appropriate mode depending on the output signals of the connected unit.

get to the output/input set screen Press m. Move the highlight bar to

OUTPUT/INPUT SET using the Aand Bbuttons and press

3

OK /

(or E).

 

 

 

select mode Move the highlight bar to L-2 INPUT using the Aand B

buttons. Press

3

OK /

(or E) to select the desired mode:

 

 

 

FOR L-2 INPUT

VIDEO : If a connected device’s output is compatible only with regular video signals, set to VIDEO.

S-VIDEO : If a connected device’s output is compatible with Y/C signals, set to S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

 

OUTPUT/INPUT SET

L-1

OUTPUT

VIDEO

 

 

 

F L-2

INPUT

VIDEO

[1] a k [MENU]: EXIT

return to normal screen Press m.

Image 38
Contents HR-S6955EK Safety Precautions Blue to N Neutral or Black Brown to L Live or RedMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents Display Remote control Diagram Key Front PanelWelcome to JVC Getting Everything ReadyScart and rf Auto Setup Three-Step Quick StartGo straight to 2000 used as example only Check the ResultsFinish Off Perform Clock Set on Go to StepThree-step quick start Basic Features Play PlaybackLoad a Video Cassette Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardPause During Playback Playback FeaturesAdvanced JOG Dial Single Frame MovementHigh Speed Search Slow MotionVariable Speed Search Set the Tape Speed RecordingChoose a Programme Start RecordingChange Display Information Resetting the CounterDisplay Tape Remaining Time Instant Timer Recording Recording Resume FunctionPress pyou will see the following TV screen information Get to the Video Plus + ScreenEnter the PlusCode Number Return to Normal Screen Engage Timer Mode Enter Programme Details Express Timer ProgrammingGet to the Programme Screen About 5 seconds, then the normal TV screen appears 24H Express Timer Programming Check, Cancel & Change Programmes Press c, then press oto disengage the timer modeBasic features Advanced Features Video Stabilizer Picture QualityManual Tracking Or E to set to onPicture Control Tape Type Super VHS ET S-VHS ETSee ‘Super VHS ET S-VHS ET’ on Super VHS S-VHS, S-VHS ET and VHSYour VCR can record in S-VHS, S-VHS ET or VHS Turning B.E.S.T. on or OFF Recording and Playback Using B.E.S.TAvoiding B.E.S.T. Time Delay Soundtrack Selection Sound ModesNicam Stereo and Bilingual Broadcasts Index Search Begin playback. The display panel tells you how many timerSkip Search Instant ReViewOutput Setting EditingInput Setting For L-2 InputEditing Using Another VCR Your VCR as the Player Editing from a Camcorder Other Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerRepeat Playback Auto TimerAuto Power Off/3H Next Function MemoryConnection to a Stereo System AUX in or Tape MonitorVideo Channel Set Access Video Channel ModeExit Video Channel Set Mode Set Video ChannelAuto Channel Setup Tuner SetPress Or E Manual Channel SetupButton on the Remote Control to move the highlight bar Confir- onwards asDelete a Channel To the preset position you want then pressChange Station Name Confirmation screen appearsButton to move the station to the new preset position Change Station Preset PositionButton on the Remote Control until the item you want to Then pressTV Station ID Guide Fine-Tuning Stored ChannelsButton on the Remote Control to move the highlight bar to Channel that you wish to fine-tune then pressTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Or E. The date Setting the ClockClock Set Or E. Set the correct yearManually Setting Guide Program Numbers To receive the TV station then press Or ECan the VCR indefinitely remain in the still mode? Uand cremain lit on the display panel. Is there a problem?Question and Answers Can the VCR indefinitely remain in the Record-Pause mode?Troubleshooting Symptom Possible CauseRe-perform the clock and/or timer settings Other Problems List of Terms Record a Programme While Watching AnotherHR-S6955EK