JVC HR-S6600EK setup guide Recording

Page 14

14

BASICOPERATIONS(cont.)

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

				5	PLAY
			1		PLAY
			1
		PAUSE		SP/LP	STOP/EJECT
	PROG	5	4	SP/LP	STOP/EJECT
TV			RECORD	3		6
2				3		6

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

LOAD A CASSETTE

1 Insert a cassette with the record safety tab intact (See below).

●The counter is reset to 0:00:00 and the recorder power comes on automatically.

CHOOSE A PROGRAMME

Press TV PROG +/– or the NUMBER keys to select the

2 preset you wish to record.

SET TAPE SPEED

Press SP/LP ( ). Check the SP/LP indicator on the

recorder display panel to confirm the selected tape

3 speed.

● Picture quality of LP recordings will not be as high as

on SP recordings.

START RECORDING

Press and hold RECORD and press PLAY on the remote

4 control, or press RECORD on the recorder.

TV/VCR

	2	1	2	3
		4	5	6
	NUMBER

7 8 9

0

1

?

4,5 PLAY

4 RECORD

3

6	STOP

2

4

TV PROG 2

SP/LP 3

PAUSE 5

	B.E.S.T. takes place at the beginning of both the
	first SP and the first LP recording after inserting the
	cassette (☞ pg. 22).


	If "DIRECT REC" is set to "ON", the programme
	that appears on the TV screen will be recorded
	(☞ pg. 11).


	● You can not change the preset whilst recording is in
	progress. To change the preset, see step 5.

	PAUSE/RESUME
5	RECORDING
	Press PAUSE. Press PLAY to resume recording.

	● During the Record Pause mode, you can change the
	preset by pressing the TV PROG +/– buttons or the
	NUMBER keys.

	STOP RECORDING
	Press STOP on the remote control or STOP/EJECT on
	the recorder. Then press STOP/EJECT to remove the
6 cassette.

INFORMATION

When using the AV connection (☞ pg. 6), you can switch between TV mode and AV mode by pressing TV/VCR.

*Depending on the type of TV used, TV/VCR button does not function as described above.

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 14

Contents HR-S6600EK Safety Precautions Connection to the mains supply in the United KingdomMoisture Condensation Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of Recorder Connect Video Recorder to TVBack of TV Back of TV Audio in connectors Video ConnectionBefore performing the following procedure, make sure that Go to itemProgress, this process will be interrupted Or remote control until the display panelShows either the display as illustrated on You will need to start again. See Notes belowIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTurn on the Recorder TV Auto Power OnLink Functions NexTView LinkPoint PlaybackLoad a Cassette Start PlaybackActivate HIGH-SPEED Search PlaybackSearch Recording Engage ITR Mode Select Preset to WatchReset Counter SET Counter DisplayAccess Video PLUS+ Program Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Enter Pluscode NumberTimer Warning PDC RecordingStart Time Express Timer ProgrammingBefore performing Express Timer Programming TimeReturn to Normal SET PDC ModeTimer Mode ScreenCancel or Replace a Programme Check, Cancel And Replace ProgrammesAccess Programme SCREEN/ Display Return to Timer ModeRecording According To Tape Type VHS Super VHS and VHSPlayback/ Recording According To Tape Charac- teristics Access Main Menu ScreenAccess Mode SET Screen S.T. Picture SystemOr press Record on the recorder RecordingPlayback Manual Tracking Playback Picture AdjustmentAdjust Tracking Manually Override Automatic TrackingSections Looking For Scene You WantSkip Over Unwanted Activate Index SearchReceiving Nicam Stereo And Bilingual Programmes Selecting Sound You WantSoundtrack Selection During PlaybackReturn to Normal Screen Select Picture Control SET ModeMinimizing Picture Degradation While Editing Advantages Of S-VHS Video RecordersEdit From Camcorder SET RECORDER’S Input ModeSET Edit Mode Make ConnectionsEdit To Or From Another Video Recorder TV Receiver Player Your recorder Recorder AV1 Select Setting AV2 Select SettingAutomatic Satellite Programme Recording ConnectorTV Aerial cable Connector Audio in connectors Satellite Receiver UnitAccess Main Menu Screen On-Screen Display ENABLE/DISABLE ON-SCREEN DisplayOther Functions 13 14Power SAVE, then press Power Save ModeSelect Power Save Auto Timer Next Function MemoryNtsc Playback Auto SP→LP TimerRepeat Playback Activate Repeat PlaybackConnection To Stereo System Audio Cable not provided SpeakerClock Set Just ClockVideo Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video ChannelWith RF Connection Auto Channel Set Tuner SetPerform Auto Channel SET After Scan Completed Screen preset positionsProcedures Is displayed on the screenInput Channel Select BandStoring Channels Manually Enter NEW Channel InformationDelete a Channel Change Station Preset PositionFine-Tuning Channels Already Stored Channel SET Screen Access ManualSwitch Stations Select NEW StationTV Station And ID List TV Station Channel Number Guide Guide Program Number Set Video Plus+ SetupNumber Troubleshooting Timer Recording Won’t stopQuestions And Answers Ä remain lit on the display panel. Is there Problem?Index Front ViewRear View Display Panel # $Remote Control Button accesses Program screens/displaysAuto Tracking Button enables/disables auto VCR, TV Prog +/-,TV +/-, TV MutingEMO Memo VHF 44.5 143/143 470 MHz Maximum recording timeDA4 Double Azimuth helical