JVC HR-S6600EK Looking For Scene You Want, Skip Over Unwanted, Sections, Activate Index Search

Looking For

The Scene

You Want

REVIEW

1 2 3

2

4 5 6

7 8 9

0 4

30 SEC

1 ?

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

25

Index Search

Your recorder automatically marks	£	2
index codes at the beginning of

each recording. This function gives you quick access to any one of 9 index codes in either direction.

NOTES:

●Before starting, make sure the recorder is in the Stop mode.

●If "O.S.D." is set to "ON" (☞ pg. 34), "MARK" blinks on the screen while an index code is being marked.

ACTIVATE INDEX SEARCH

1 Press @ or # (ª or £). “ª 1” or “£ 1” is displayed on screen and search begins in the corre- sponding direction.

●To access index codes 2 through 9, press @or # repeatedly until the correct index number is displayed. Ex.: To locate the beginning of B from the current

position, press @ twice.

To locate the beginning of D from the current position, press # once.

Current position

A	B C		D	E	F
–2		–1	1	2	3
		￿

Index number

●When the specified index code is located, playback begins automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTES:

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number of recorded programmes will not be displayed on the front display panel after Auto Satellite Prog recording (☞ pg. 32).