JVC HR-S6600EK Edit From Camcorder, Make Connections, SET RECORDER’S Input Mode, SET Edit Mode

28ADVANCEDOPERATIONS(cont.)

Edit From

A Camcorder

You can use a camcorder as the source player and your video recorder as the recorder.

1	MAKE CONNECTIONS
	A If the camcorder has no S-VIDEO output connector...
	... connect the camcorder’s AUDIO/VIDEO OUT
	connectors to the recorder’s AV2 IN/DECODER or
	AV1 IN/OUT connector via the cable adapter.
	B If the camcorder has an S-VIDEO output connector...
	... connect the camcorder’s S-VIDEO OUT and
	AUDIO OUT connectors to the recorder’s S-VIDEO
	and AUDIO input connectors.
	● When using a monaural camcorder, connect its
	AUDIO OUT connector to the AUDIO L input
	connector on your recorder.

1 2 3

4 5 6

7 8 9

NUMBER "0" 0

1 ?

2

4

TV PROG

● When a Master Edit Control-equipped JVC camcorder

is used, the camcorder is capable of controlling the

recorder. Refer to the camcorder’s instruction manual

for operating procedure.

SET RECORDER’S INPUT MODE

Press NUMBER key “0” and/or TV PROG to select "L-1"

for the AV1 IN/OUT connector, "L-2" for the AV2 IN/

DECODER connector, or "S-1" for the AUDIO/S-VIDEO

2 input connectors, depending on the connectors being

used.

SET EDIT MODE

3 See "Picture Control" on page 27.

START CAMCORDER

Engage its Play mode.

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

●When you select EDIT to dub tapes in step 3, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.

AIf the camcorder has no S-VIDEO output connector...

Recorder

4
5	START RECORDER
	Engage its Record mode.

BIf the camcorder has an S-VIDEO output connector...

Recorder

S-VIDEO input AUDIO input

S-Video Cable (not provided)

Audio Cable (not provided)

VIDEO OUT	Audio/Video Cable	S-VIDEO OUT
	(not provided)
Camcorder		Camcorder
AUDIO OUT		AUDIO OUT

Player Player