JVC HR-S6600EK setup guide Video Channel Set, Access Video Channel SET Mode, SET Video Channel

Page 40

40SUBSIDIARYSETTINGS(cont.)

Video Channel Set

Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

STOP

IMPORTANT

Perform the following steps only if —

—Video Channel Set has not been done correctly by the Auto Set Up function (☞ pg. 8).

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV or S-VIDEO connection, or vice versa.

●If you have connected the video recorder to your TV via both the provided RF cable and a

21-pin SCART cable (AV connection), or via the provided RF cable, an S-Video cable and an audio cable (S-VIDEO connection), you do not need the video channel so you have to set the video channel to off. — Go to "With AV or S- VIDEO Connection" below.

●If you have connected the video recorder to your TV via the provided RF cable only (RF connection), you have to set the correct video channel — Go to "With RF Connection" on page 41.

1 2 3

4 5 6

7 8 9

0

1

?

2

4

TV PROG

OK

With AV or S-VIDEO

Connection

Before performing the following procedure, make sure that:

■the mains power cord is plugged into the mains outlet.

■the video recorder is turned off and there is no cassette inserted in the recorder.

■batteries have been installed in the remote control.

ACCESS VIDEO CHANNEL SET MODE

1	Press and hold down STOP on the recorder until the
	display panel shows the following.


2	SET VIDEO CHANNEL
	Press TV PROG – until the display panel shows
	"–OUT– –".

●Now the video channel is set to off.

EXIT VIDEO CHANNEL SET MODE

3 Press OK.

To view picture signals from the video recorder, set your TV to its AV mode. Refer to the instructions supplied with your TV set for how to do this.

Image 40

Contents HR-S6600EK Safety Precautions Connection to the mains supply in the United KingdomMoisture Condensation Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of TV Connect Video Recorder to TVBack of Recorder Back of TV Audio in connectors Video ConnectionBefore performing the following procedure, make sure that Go to itemOr remote control until the display panel Shows either the display as illustrated onProgress, this process will be interrupted You will need to start again. See Notes belowIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTV Auto Power On Link FunctionsTurn on the Recorder NexTView LinkPlayback Load a CassettePoint Start PlaybackSearch PlaybackActivate HIGH-SPEED Search Recording Select Preset to Watch Reset CounterEngage ITR Mode SET Counter DisplayVideo Plus+ Timer Programming Access Video PLUS+ ScreenAccess Video PLUS+ Program Screen Enter Pluscode NumberTimer Warning PDC RecordingExpress Timer Programming Before performing Express Timer ProgrammingStart Time TimeSET PDC Mode Timer ModeReturn to Normal ScreenCheck, Cancel And Replace Programmes Access Programme SCREEN/ DisplayCancel or Replace a Programme Return to Timer ModeRecording According To Tape Type VHS Super VHS and VHSAccess Main Menu Screen Access Mode SET ScreenPlayback/ Recording According To Tape Charac- teristics S.T. Picture SystemPlayback RecordingOr press Record on the recorder Playback Picture Adjustment Adjust Tracking ManuallyManual Tracking Override Automatic TrackingLooking For Scene You Want Skip Over UnwantedSections Activate Index SearchSelecting Sound You Want Soundtrack SelectionReceiving Nicam Stereo And Bilingual Programmes During PlaybackSelect Picture Control SET Mode Minimizing Picture Degradation While EditingReturn to Normal Screen Advantages Of S-VHS Video RecordersSET RECORDER’S Input Mode SET Edit ModeEdit From Camcorder Make ConnectionsEdit To Or From Another Video Recorder TV Receiver Player Your recorder Recorder AV1 Select Setting AV2 Select SettingConnector TV Aerial cable Connector Audio in connectorsAutomatic Satellite Programme Recording Satellite Receiver UnitAccess Main Menu Screen ENABLE/DISABLE ON-SCREEN Display Other FunctionsOn-Screen Display 13 14Select Power Save Power Save ModePower SAVE, then press Auto Timer Next Function MemoryAuto SP→LP Timer Repeat PlaybackNtsc Playback Activate Repeat PlaybackConnection To Stereo System Audio Cable not provided SpeakerClock Set Just ClockAccess Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET Video ChannelWith RF Connection Perform Auto Channel SET Tuner SetAuto Channel Set Screen preset positions ProceduresAfter Scan Completed Is displayed on the screenSelect Band Storing Channels ManuallyInput Channel Enter NEW Channel InformationFine-Tuning Channels Already Stored Change Station Preset PositionDelete a Channel Access Manual Switch StationsChannel SET Screen Select NEW StationTV Station And ID List TV Station Channel Number Guide Number Video Plus+ SetupGuide Program Number Set Troubleshooting Timer Recording Won’t stopQuestions And Answers Ä remain lit on the display panel. Is there Problem?Index Front ViewRear View Display Panel # $Remote Control Button accesses Program screens/displaysAuto Tracking Button enables/disables auto VCR, TV Prog +/-,TV +/-, TV MutingEMO Memo DA4 Double Azimuth helical Maximum recording timeVHF 44.5 143/143 470 MHz