JVC HR-S7300U Select Cable BOX Output Channel, Return to Cable BOX SET Screen, Turn on Cable BOX

CABLE BOX BRAND

1

SELECT BRAND NO. AND PRESS (ENTER)

PRESS (MENU) TO END

CABLE BOX OUTPUT =OFF

ON CH2

ON CH3

ON CH4

ON CH5

ON CH6

ON LINE

PRESS (SET+/–) FOR CHOICE PRESS (MENU) TO END

18

INITIALSETTINGS(cont.)

MENU		SELECT		6
	+	00	0
			000
	–	000000000000000000	00000000000000000
SET

	1	2	3		7
DIGIT	4	5	6	MENU

SELECT CABLE BOX

OUTPUT CHANNEL

Your selection depends on how your cable box is connected to your VCR.

If your cable box is connected to your VCR using an RF connection . . .

. . . press SET+/– to place the arrow next to the

channel number representing the cable box’s output (2– 6).

If your cable box is connected to your VCR’s AUDIO/ VIDEO IN connectors . . .

. . . press SET+/– to place the arrow next to “ON LINE”.

RETURN TO CABLE BOX SET SCREEN

Press MENU.

7 8 9

ENTER

SET

0

Set Cable Box Brand

SELECT

1

TURN ON CABLE BOX

Select a channel other than channel 9 on your Cable Box.

ACCESS BRAND SET SCREEN

2

At the Cable Box Set screen, press SET +/– to place the arrow next to “BRAND SET”, then press

SELECT.

CABLE BOX SET

CABLE BOX OUTPUT =BRAND SET

PRESS (SELECT, SET+/–)

PRESS (MENU) TO END

3

ENTER CABLE BOX BRAND

Press the appropriate DIGIT keys to enter the Cable Box Code from the

CABLE BOX BRAND LIST on page 19, then press

ENTER.

● If the cable box’s channel changes to 9, setting is complete.

●If there are more than one code number listed for your brand of cable box, repeat step 3 until the cable box’s channel changes to 9.

●If you go through all listed code numbers and the channel doesn’t change, try all other numbers between 1 and 69. That is because, maybe, your cable box model is not listed.