22 EN | PLAYBACK (cont.) |
Variable Speed Search
During playback, turn the JOG dial to the right for forward
OR
During playback, press w or e.
●The more times you press, the faster the playback picture moves.
●To decrease speed, press the button for the opposite direction.
To resume normal playback, press 4.
Index Search
Your recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
Activate Index Search.
Press w or e (2 or 6). “2 1” or “6 1” is displayed on the TV screen and search begins in the corresponding direction.
●To access index codes 2 through 9, press w or e repeatedly until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press w twice.
To locate the beginning of D from the current position, press e once.
Current position
Index number
●When the specified index code is located, playback begins automatically.
Skip Search
During playback, press 30 SEC 1 to 4 times to skip over unwanted sections.
Each press initiates a
To resume normal playback during a Skip Search, press 4.
Instant ReView
Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last
NOTE:
Before starting, make sure that the recorder is off and that the Timer mode is disengaged.
Activate Instant ReView.
Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last
●The front display panel tells you how many programmes have
been
the Instant REVIEW indicator () and “3” blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.
●The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Programme Recording ( pg. 35).