JVC HR-S7950EU Navigation Playback, Programme Navigation Screen, Load a recorded cassette

Page 37

EN 37

Navigation Playback

This function is useful when you wish to quickly find out what programmes you have recorded on a tape with this recorder. This function allows you to select a programme to watch, and then automatically searches for the start of the programme.

A Load a recorded cassette.

Insert a cassette recorded on this recorder.

B Access the Main Menu screen.

Press MENU.

C Access the Programme Navigation screen.

Press rt to move the highlight bar (pointer) to

“PROGRAMME NAVIGATION”, then press OK or e.

● If “NO TAPE DATA DETECTED” appears on the TV screen, you cannot use the Navigation Playback function.

D Select a programme.

Press rt to move the highlight bar (pointer) to the programme you want to watch.

E Start playback.

Press OK. “SEARCHING” appears on the TV screen. Playback begins automatically after the selected programme is located.

Programme Navigation Screen

A Recording date

B Recording start time*

C Station name*

*After entering the programme title ( pg. 38), programme title appears instead of the recording start time and station name.

D Currently selected programme

E Programme title*

*Before entering the programme title ( pg. 38), recording start time and station name appear instead of the programme title.

NOTES:

●If you do not want to use Programme Navigation function, set “PROG. NAVIGATION” to “OFF” ( pg. 50).

●You cannot edit programme title or delete tape data for the cassette with the record safety tab removed.

●Programme Navigation is possible with the cassettes recorded with this recorder only.

●Before recording, make sure the recorder’s clock is set correctly.

●To record the programme information in this recorder’s memory, you must continue to record each programme for over the minimum recording time; 8 minutes for the SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode.

●Programme Navigation may not work properly depending on the tape being used.

●The programme information is stored in this recorder’s memory. If the memory in this recorder should ever be damaged and the programme information lost, it is impossible to restore that information.

Image 37

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Front Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection To connect to a TV with S-VIDEO/AUDIO in connectors12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpConfirm/Set video channel On the front display panel14 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 20 EN Basic PlaybackHigh-Speed Turbo Search Slow MotionPause during playback Activate frame-by-frame playbackVariable Speed Search 22 ENIndex Search Skip SearchRepeat Playback Next Function MemoryManual Tracking Soundtrack Selection24 EN Tape Remaining Time Instant Timer Recording ITR26 EN Engage the S-VHS ET modeSuper VHS ET S-VHS ET Receiving Stereo and Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 28 ENAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode Enter the programme title30 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+Before performing the 24 Hour Express Timer Programming Enter the programme mode32 EN Set the programme start/stop time and channelCancel or change a programme Disengage the timer modeReturn to the timer mode Access the Programme Check screen/displayConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording Before performing the following steps36 EN NavigationProgramme Navigation Screen Navigation PlaybackLoad a recorded cassette Select a programmeEdit Programme Title 38 ENSelect the programme Delete Tape Data Entering CharacterDelete the tape data Example Enter JVC News40 EN Edit From a CamcorderAnother Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerOutput/Input Set Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections 46 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingRecorder is powered back on Using this video recorder as the source player for editingWith old tapes and rental cassettes Clear picture reproduction is also linked to this functionEntire programme while timer-recording in SP mode On the remote control, or press 7 on the recorder50 EN Function pg , set PROG. Navigation to OFFIndicator lights up on the front display panel Correction to the luminance signal to enhance detailS-VHS recording mode is selected Mode settingColour System 52 ENGuide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program numberTuner Set Access the Auto Channel Set screen54 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 56 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 58 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen60 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 62 ENPower Recording 64 ENOther Problems Playback 66 ENMemory backup time Approx min Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS68 EN Memo 70 EN