EN 41
Edit To Or From
Another Video
Recorder
A |
|
|
TV receiver | Player | Your recorder |
|
| |
| (not provided) |
|
AV mode |
|
|
| Another recorder | |
| Recorder |
|
B |
|
|
Recorder | Your recorder | TV receiver |
| ||
(not provided) | AV mode | |
|
| |
Another recorder |
| |
Player |
|
|
Advantages of S-VHS video recorders
You can edit from VHS to
●From VHS to
●From
●From
You can use your recorder as the source player or as the recording deck.
A Make connections.
Connect the player’s
AWhen using your recorder as the source player ...
... connect its AV1
BWhen using your recorder as the recording deck ...
... connect its AV1
DECODER connector to the source player.
●If another recorder is compatible with the Y/C signal ...
... when using your recorder as the source player, set
... when using your recorder as the recording deck, set
B Set the input mode of recording deck.
With this video recorder, press AUX (number key “0”) and/or PR to select
●When using another recorder as the recording deck, refer to its instruction manual.
●When using the AV2
C Set the edit mode.
See “PICTURE CONTROL” on page 49.
D Start the source player.
Engage the Play mode of the source player.
E Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
●All necessary cables can be obtained from your dealer.
●For Y/C signal input/output, be sure to use a
●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.
●When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting ( pg. 49).
●If you are using another recorder with
... connect its rear panel S VIDEO OUT and AUDIO OUT connectors to the recording deck’s
When using your recorder as the recording deck ...
... connect its front panel