JVC HR-S7950EU With old tapes and rental cassettes, Playing back a tape recorded on a camcorder

		EN 49
		* The default setting is bold in the table below.
8 DIGITAL TBC/NR	Your recorder is equipped with the Digital TBC (Time Base Corrector) that
ON	removes jitter from fluctuating video signals to deliver a stable picture even
OFF	with old tapes and rental cassettes.
	The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables
	clear picture reproduction is also linked to this function.
	We recommend that you set “DIGITAL TBC/NR” to “ON” when...
	... playing back a tape recorded on a camcorder.
	... playing back a tape repeatedly used.
	... using this video recorder as the source player for editing.
	NOTES:
	● If you play back a tape recorded under poor TV reception condition, the picture may
	become more stable with Digital TBC/NR set to off.
	● When “DIGITAL TBC/NR” is set to “ON”, if you play back a tape where certain types
	of signals are recorded (using a PC or some character generators), the playback
	picture may be distorted. If this is the case, set “DIGITAL TBC/NR” to “OFF”.
	● When playing back a MESECAM tape, Digital TBC/NR does not function even
	though “DIGITAL TBC/NR” is set to “ON”.
8 B.E.S.T.	You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to
ON	“ON” or “OFF” ( pg. 27).
OFF
8 PICTURE CONTROL	This feature helps you to adjust the playback picture quality according to
AUTO	your preference. Normally select “AUTO”.
EDIT	AUTO:	Provides the optimised picture benefits of the B.E.S.T. Picture
SOFT	EDIT:	System.
SHARP		Minimizes picture degradation during editing (recording and
	SOFT:	playback).
		Reduces image coarseness when viewing overplayed tapes
	SHARP:	containing a lot of noise.
		Clearer, sharper-edged picture when viewing images with lots of
		flat, same-coloured surfaces such as cartoons.
	NOTES:
	● When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change
	until you select another mode.
	● When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish
	dubbing the tapes.
	● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically from
	“AUTO” to “NORM”.
8 AUTO TIMER	When this function is set to “ON”, the timer is automatically engaged when
ON	the recorder power is turned off, and automatically disengaged when the
OFF	recorder is powered back on.
	NOTE:
	For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are
	disabled while the Timer mode is engaged. To disengage the timer, press # (TIMER).
8 O.S.D.	When this function is set to “ON”, various operational indicators appear on
ON	the TV screen. Messages appear in the selected language ( pg. 15, 16).
OFF	NOTES:
	● When you use this recorder as the source player for editing, be sure to set “O.S.D.”
	to “OFF” before starting.
	● During playback, the operation mode indicators may be disturbed depending on the
	type of tape being used.