Index Search
Your recorder automatically marks
index codes at the beginning of£ 2 each recording. This function gives
you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1 Press PUSH JOG Þ or %(ª or £) on the remote control. “ª 1” or “£ 1” is displayed on screen and search begins in the corresponding direction.
●To access index codes 2 through 9, press PUSH JOG
Þor % repeatedly until the correct index number is displayed.
Ex.: To locate the beginning of B from the current position, press PUSH JOG Þtwice.
To locate the beginning of D from the current position, press PUSH JOG %once.
Current position
A |
| B |
| C |
| D | E |
| F | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | 2 | 3 |
| ||||||||
|
|
| % |
|
|
| % |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
Index number
●When the specified index code is located, playback begins automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last
NOTE:
Before starting, make sure that the recorder is off and that the Timer mode is disengaged.
ACTIVATE INSTANT
REVIEW
1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last
The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.
NOTE:
Instant ReView is not possible while the recorder is in the Timer mode.
EN17
MESECAM Playback
Your recorder is equipped with MESECAM circuitry that can play back MESECAM tapes. MESECAM is the designation for tapes with SECAM signals that have been recorded on a
| LOAD A CASSETTE |
|
1 Insert a cassette recorded in MESECAM. | ||
| ENGAGE MESECAM PLAYBACK | |
| MODE |
|
| Press MESECAM PLAY- |
|
| BACK; the current setting |
|
| will be displayed on the |
|
2 screen for about 5 seconds. |
| |
| Pressing MESECAM | MESECAM P.B. ON |
| PLAYBACK while the |
|
| screen shows the display |
|
| changes the setting. |
|
●The setting will remain effective even though
you turn on/off the recorder or you insert/eject the cassette.
●The setting cannot be changed during search, still,
START PLAYBACK
3 Press PLAY.
NOTES:
●You can change the "MESECAM P.B." setting even though "O.S.D." is set to "OFF".
●When you play back a PAL or SECAM tape, be sure to set "MESECAM P.B." to "OFF".
Repeat Playback
Your video recorder can automatically play back the whole tape 20 times repeatedly.
1 |
| START PLAYBACK |
| Press PLAY. | |
2 |
| ACTIVATE REPEAT PLAYBACK |
| Press PLAY and hold for over 5 seconds, then release. | |
|
| |
| ● The Play indicator ($) on the display panel blinks | |
| slowly. | |
|
| ● The tape plays 20 times automatically, and then |
|
| stops. |
|
|
|
3 |
| STOP PLAYBACK |
| Press STOP at any time to stop playback. |
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.