EN
5
If TV has no 21-pin SCART connector:
Connect an optional AV cable between the TV's
TV
Output cable adapter (not provided)
| AV cable | |
| (not provided) | |
| Recorder | |
To | To AV1 IN/OUT | |
terminals | ||
connector | ||
|
TV Aerial Cable (not provided)
AV1 IN/OUT
IN S OUT
AUDIO
IN OUT
LL
RR
AV1 | OUT | RF OUT |
| ||
COMP. | Y/C | ANT.IN |
AV1 IN/OUT |
|
|
AV2 IN | PAUSE/ |
|
| R.A.EDIT |
|
AV1 OUT Switch | Back of Recorder |
AV1 OUTPUT SIGNAL SELECTION
The AV1 IN/OUT connector accepts only a composite signal (regular video signal), but can deliver either a composite video signal or a Y/C signal (a signal in which the luminance and chrominance signals are separated) according to the setting of the rear panel AV1 OUT switch.
●If your TV's
●If your TV's
IMPORTANT:
●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV's SCART connector.
●For switching the TV's mode, refer to the instruction manual of your television.