JVC LPT0421-001B Remote Control Functions, Remove Power Supply, SET Remote Control Code

Page 26

26ENSPECIALFEATURES

Remote

Control

Functions

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control's A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

REMOVE POWER SUPPLY

1 Unplug the mains power cord from the mains outlet.

VCR

NUMBER "1"

1

 

2

3

 

 

 

 

 

4

 

5

6

 

7

"2"

8

9

 

NUMBER

 

0

 

 

 

 

 

 

1

 

 

 

3

2

4

OK

SET REMOTE CONTROL

CODE

2 While holding down VCR on the remote control, press the NUMBER key "2" and then press OK.

RE-SUPPLY POWER

3 Plug the mains power cord back into the mains outlet.

TURN THE RECORDER ON

4 Press on the remote control. The recorder will now only respond to B code signals.

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.

Image 26
Contents HR-J277MS HR-J271MS Do not place the recorder Safety PrecautionsSafety First Basic ConnectionsSelect TV System Access Video Channel SET ModeVideo Channel Set EN I Nitial Sett IngsFinish Video Channel SET Video ChannelFinish Video Channel SET SETSET Time Auto Set UpSelect Language SET DateMajor Countries/Areas TV System During Auto Set UpStart Auto Channel SET Press OK or Push JOG ÞOn-Screen Displays Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display Turn on the RecorderAccess Initial SET Screen Select LanguageClock Set Point Basic PlaybackLoad a Cassette Start PlaybackPlayback Playback FeaturesSearch Activate HIGH-SPEED SearchReturn to Automatic Tracking Adjust Tracking ManuallyOverride Automatic Tracking Activate Instant ReviewSections Activate Index SearchSkip Over Unwanted EN PlaybackTape Position Indicator Access Main Nenu ScreenSET Mode Picture ControlBasic Recording Recording Features Preparation S.T. Picture SystemEN Recording JogþOr press Record on the recorder RecordingPlayback During B.E.S.TEnter Programme Stop Time Express Timer ProgrammingEN Timer Recording Enter Programme DateAnytime during steps 2 through 7, press Weekly Number Engage Recorders Timer ModePress SP/LP/EP to set the tape speed Check, Cancel And Replace Programmes Disengage Timer ModeReturn to Timer Mode Confirm the Overlap Cancel or ChangeProgramme Setting Ping ProgrammesAuto SP→LP Timer Timer RecordingAuto SP→LP Timer Auto Timer Before performing the following steps REC Linc indicatorAutomatic Sat- ellite Program Recording SET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY PowerSET TV Brand Code Control Your TV Using Additional ButtonsTV Multi-brand Remote Control TV/VCR, TVOperate Unit Multi-brand Remote ControlSET Brand Code TV PR +/-,NUMBER keysCable BOX Brand Name Code Cable Box or Satellite Re- ceiver Multi-brand CodeDVD Multi-brand Code DVD Brand Name CodeEdit To Or From Another Video Recorder Start Camcorder SET Recorders Input ModeEdit From a Camcorder Start RecorderOff-Air Recording Setting Of The Colour System Select ButtonsMode Display DescriptionRecorded tape Tape-To-Tape EditingRecorded tape HR-J277MS/HR-J271MS Playback equipmentSelect Auto CH SET Access Main MenuAccess Tuner SET Tuner SETSET Desired Station Access Channel ListSelect Position Manual Channel SetSwap Channel Positions EN Tuner SETDelete a Channel JOG%Fine-Tuning Channels Push JOG ÞPress Play to turn the indicator off Check the cassette EN TroubleshootingIf youre using the RF OUT connec- tion Try manual tracking. pgRecording Roubleshooting New one. pgQuest Ions and Answers EN Playback RecordingIndex Front ViewDisplay Panel EN Index Be used to operate your TV pgSpecif Ications Supplied fresh battery actualAuto Head Cleaner Mm x 94 mm x 278 mmHR-J271MS