JVC HR-J277MS, HR-J271MS, LPT0421-001B specifications Edit To Or From Another Video Recorder

30EN

EDITING

Edit To Or

From Another

Video

Recorder

1 2 3

2

4 5 6

7 8 9

4

You can use your video recorder as the source player or the recording deck.

MAKE CONNECTIONS

1 Connect the player's AUDIO/VIDEO OUT connector to the recorder's AUDIO/VIDEO IN connector.

●Use the L connector for monaural connection.

	SET RECORDING DECK'S
2	INPUT MODE
	Set to AUX. With this video recorder, press NUMBER
	key "0" and/or PR +/ – to "L-1".
	SELECT "EDIT" FOR PICTURE
	CONTROL SET MODE
	Follow the "Picture Control" section on page 15, then
3 select "EDIT."
4	START SOURCE PLAYER
	Engage its Play mode.
5	START RECORDING DECK
	Engage its Record mode.

NUMBER "0"

1

IMPORTANT:

0

PR +/–

NOTES:

● All necessary cables can be obtained from your dealer.

● When you use this recorder as the player for editing, be sure

to set "O.S.D." to "OFF" before starting (☞ pg. 8).

● NTSC tapes being played back in the NTSC [PAL mode

(☞ pg. 33) cannot be dubbed to another recorder.

● When you dub an NTSC tape using your recorder as the

playback deck, select NTSC 3.58 (or NTSC 4.43) with the

COLOUR SYSTEM button (☞ pg. 32).

●To edit, both the player and the recorder must be of the same colour system. Press your recorder's COLOUR SYSTEM button to select the appropriate colour system.

●For more information on multi-system compatibility, ☞ pg. 32.

● When you select "EDIT" to dub tapes, be sure to select

"AUTO" (or "NORM" when the B.E.S.T. function is set to

"OFF") after you finish dubbing the tapes (☞ pg. 15).

TV Receiver	Player	Your recorder	Recorder	Your recorder	TV Receiver
VIDEO		AV Cable		AV Cable	VIDEO
		(not provided)		(not provided)
CHANNEL					CHANNEL
RF Cable (provided)				RF Cable
				(provided)
		Another recorder	Another recorder
Recorder				Player