JVC LPT0421-001B Setting Of The Colour System Select Buttons, Off-Air Recording, Mode Display

Page 32

32EN

INFORMATIONONMULTI-SYSTEMCOMPATIBILITY

Setting Of The Colour System Select Buttons

COLOUR SYSTEM

Mode Display

AUTO

NTSC 3.58

NTSC 4.43

NTSCPAL*

PAL

MESECAM

Use the COLOUR SYSTEM button on the front panel to select the colour system. Pressing the COLOUR SYSTEM displays the current setting on the screen. While the current setting is displayed, press COLOUR SYSTEM again to change the mode as illustrated on the left. The On-Screen display will show which mode is selected.

Mode	Description

AUTO	Usually set to this mode. This mode
	automatically detects PAL, NTSC, SECAM
	or MESECAM and adjusts to the colour
	system being recorded or played back.
	When it does not perform properly, set the
	colour system manually.

MANUAL	For recording, there is a choice of 4
	selectable modes; PAL/MESECAM/NTSC
	3.58/NTSC4.43. Select the mode that
	matches the colour signal being received.
	For playback, there is an additional mode
	which allows NTSC tapes to be played
	back and viewed on PAL TVs.

*"NTSC[PAL" appears during playback only.

NOTES:

●In the AUTO mode, NTSC signals will be automatically recorded as NTSC 3.58.

●In the AUTO mode, NTSC tapes will be played back as NTSC 3.58.

●SECAM signals will always be recorded as MESECAM. Select the AUTO or the MESECAM mode when recording SECAM signals.

●When playing back a SECAM tape, select the AUTO or MESECAM mode. The playback picture will always be monochrome.

●In the NTSC4.43 mode, with some TVs, on-screen displays (Program screen etc.) may roll up or down and there may be a loss of colour. When this happens, select the AUTO mode.

Off-Air Recording

The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K broadcasts.

TV system

PAL B/G, I, D/K

SECAM B/G, D/K (OIRT)

	HR-J277MS/HR-J271MS	Recorded tape
	Recording circuit	PAL
Multi-system	PAL
Multi-system
tuner		MESECAM
(B/G, I, D/K)		MESECAM
(B/G, I, D/K)
	MESECAM

NOTE:

This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).

Image 32

Contents HR-J277MS HR-J271MS Do not place the recorder Safety PrecautionsSafety First Basic ConnectionsAccess Video Channel SET Mode Video Channel SetSelect TV System EN I Nitial Sett IngsSET Video Channel Finish Video Channel SETFinish Video Channel SETAuto Set Up Select LanguageSET Time SET DateDuring Auto Set Up Start Auto Channel SETMajor Countries/Areas TV System Press OK or Push JOG ÞAccess Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Turn on the RecorderAccess Initial SET Screen Select LanguageClock Set Basic Playback Load a CassettePoint Start PlaybackPlayback Features SearchPlayback Activate HIGH-SPEED SearchAdjust Tracking Manually Override Automatic TrackingReturn to Automatic Tracking Activate Instant ReviewActivate Index Search Skip Over UnwantedSections EN PlaybackAccess Main Nenu Screen SET ModeTape Position Indicator Picture ControlBasic Recording Recording Features S.T. Picture System EN RecordingPreparation JogþRecording PlaybackOr press Record on the recorder During B.E.S.TExpress Timer Programming EN Timer RecordingEnter Programme Stop Time Enter Programme DateAnytime during steps 2 through 7, press Weekly Number Engage Recorders Timer ModePress SP/LP/EP to set the tape speed Check, Cancel And Replace Programmes Disengage Timer ModeReturn to Timer Mode Cancel or Change Programme SettingConfirm the Overlap Ping ProgrammesAuto SP→LP Timer Timer RecordingAuto SP→LP Timer Auto Timer Before performing the following steps REC Linc indicatorAutomatic Sat- ellite Program Recording Remote Control Functions Remove Power SupplySET Remote Control Code RE-SUPPLY PowerControl Your TV Using Additional Buttons TV Multi-brand Remote ControlSET TV Brand Code TV/VCR, TVMulti-brand Remote Control SET Brand CodeOperate Unit TV PR +/-,NUMBER keysCable Box or Satellite Re- ceiver Multi-brand Code DVD Multi-brand CodeCable BOX Brand Name Code DVD Brand Name CodeEdit To Or From Another Video Recorder SET Recorders Input Mode Edit From a CamcorderStart Camcorder Start RecorderSetting Of The Colour System Select Buttons Mode DisplayOff-Air Recording DescriptionTape-To-Tape Editing Recorded tape HR-J277MS/HR-J271MSRecorded tape Playback equipmentAccess Main Menu Access Tuner SETSelect Auto CH SET Tuner SETAccess Channel List Select PositionSET Desired Station Manual Channel SetEN Tuner SET Delete a ChannelSwap Channel Positions JOG%Fine-Tuning Channels Push JOG ÞEN Troubleshooting If youre using the RF OUT connec- tionPress Play to turn the indicator off Check the cassette Try manual tracking. pgRecording Roubleshooting New one. pgQuest Ions and Answers EN Playback RecordingIndex Front ViewDisplay Panel EN Index Be used to operate your TV pgSupplied fresh battery actual Auto Head CleanerSpecif Ications Mm x 94 mm x 278 mmHR-J271MS