1 | STOP+/– | 2 | |
4 | 5 | ||
| |||
7 |
| 8 |
0
EN23
When programmes overlap each other
If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.
|
|
| PR START | STOP | CH | DATE | |
3 |
|
| 1 | 8:00 | 10:00 | 3 | 24.04 |
| PROGRAM OVERLAPPED | 2 | 10:00 | 10:45 | 2 | TUE | |
|
| ||||||
| 2 |
| 3 | 11:30 | 13:00 | 1 | 25.04 |
6 |
|
| |||||
|
| 4 | 9:00 | 10:00 | 92 | DAILY | |
|
|
| 5 |
|
|
|
|
9 |
|
| 6 |
|
|
|
|
|
| 7 |
|
|
|
| |
|
|
| 8 |
|
|
|
|
| 4 |
|
|
|
|
| |
|
|
| [5/°] = |
| [PROG] : EXIT |
START+/–
1
3
PR +/–
DATE+/–
SP/LP/EP
OK
PUSH JOG
Example: Programme 1 (you have just made) and Programme 4 overlap each other.
|
|
| CONFIRM THE OVERLAP- |
| 1 |
| PING PROGRAMMES |
|
| Overlapping programmes blink on the TV screen. | |
|
|
| SELECT THE PROGRAMME |
| 2 |
| TO MODIFY |
|
| Press PUSH JOG %Þ, then press OK or PUSH JOG%. | |
|
|
| |
|
| ● You can only select one of the overlapping | |
|
| programmes. | |
|
|
| NOTE: |
|
|
| If you do not mind this overlap, press PROG to finish |
|
|
| the timer programme setting. The programme with the |
|
|
| lower programme number will be recorded and the |
|
|
| other one will not be recorded correctly. If no changes |
|
|
| are made for approximately 1 minute, the recorder will |
|
|
| return to the normal screen. |
|
|
|
|
|
|
| CANCEL OR CHANGE |
| 3 |
| PROGRAMME SETTING |
|
| To cancel a programme, press when the Programme | |
|
| screen you do not want is shown. “PROGRAM | |
|
| COMPLETED” appears on the TV screen for about 5 | |
|
|
| seconds, then the normal screen appears. To change |
|
|
| a programme, press the appropriate button: |
|
|
| STOP |
|
|
| when the Programme screen on which you want to |
|
|
| make changes is shown, then press OK. “PROGRAM |
|
|
| COMPLETED” appears on the TV screen for about 5 |
|
|
| seconds, then the normal screen appears. |
|
|
| NOTE: |
|
|
| If the overlap is not yet solved, or another overlap |
|
|
| occurs with the timer programme setting after making |
|
|
| the last correction on a programme, the conflicting |
|
|
| programmes will be shown on the Programme Check |
|
|
| screen again. Repeat the above steps again until the |
|
|
| overlap is solved. |
|
|
|
|