4 ON-SCREEN/MENU SWITCHES
4-7 Contents of Menu Switches
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display.
4 ON-SCREEN/MENU SWITCHES
4-7 Contents of Menu Switches
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display. |
Screens | Items | Set values |
|
|
|
VIDEO MODE | V. PULSE | [OFF] |
|
| ON |
| (VCR's display) | OFF |
| ON | |
| ViD 3 | |
|
|
VTR MODE | HDR | [OFF] |
|
| ON |
VTR | 1 | OFF | |
|
| ON | |
|
| ||
CNT MEM SW | [OFF] | ||
|
| ON | |
VTR | 2 | OFF | |
ON | |||
|
| ||
|
| ||
POWER ON | [OFF] | ||
REC |
| ON | |
VTR | 3 | OFF | |
ON | |||
|
| ||
|
| ||
AUTO REC | [OFF] | ||
CHECK | ON | ||
VTR | 4 | OFF | |
ON | |||
|
| ||
|
| ||
AUTO REW | [OFF] | ||
|
| ON | |
VTR | 5 | OFF | |
ON | |||
|
| ||
REPEAT PLAY [OFF] | ||
| ON | |
VTR 6 | OFF | |
ON | ||
| ||
Function
Sets whether or not the V. pulse is added during ordinary playback (2H and 6H modes).
OFF: V. pulse is not added. Normally set to this position.
ON: V. pulse is added.
•When a camera synchronized with the power supply is switched with a switcher, the picture may be distorted at the switching point. In this case, set this switch to “ON”. This locks the monitor, preventing the picture distortion at switching points (only in the 2/6H mode).
•V. pulse is always added in the Still mode and Timelapse mode.
Sets the mode during timelapse recording.
OFF: Records in the normal timelapse mode (timelapse recording with the SP heads).
ON: Records in the HDR timelapse mode (timelapse recording with the EP heads). Refer to page 28.
Sets whether or not the counter memory function is activated. OFF: The counter memory function is not activated.
ON: The counter memory function is activated.
When the tape reel counter value reaches 0000 in the FF/REW mode, the VCR enters the Stop mode automatically.
*The counter memory function is not available during repeat recording/ playback, auto REW, alarm search, alarm scan and date/time search.
Enables or disables automatic external timer recording or automatic restart of recording after a power failure.
OFF: External timer recording or automatic recording after power failure does not function regardless of whether power is supplied or not.
ON: Recording starts automatically when power is turned on.
Sets whether or not Recording Check is automatically performed at the beginning of a tape in the Repeat Recording mode.
OFF: Automatic recording check function is disabled.
ON: Automatic recording check function is enabled.
Sets whether or not the tape is rewound automatically when the tape ends.
OFF: The tape stops at the end.
ON: The tape automatically rewinds and enters the Stop mode (auto REW).
*When the repeat recording/playback function is set to “ON”, the repeat function has priority.
*If the menu switch <TAPE END MODE> on the <ALARM/SENSOR MODE> screen is set to “STOP”, the Stop mode is engaged when the tape ends even when there is an alarm or sensor recording. The tape does not rewind.
Enables or disables the repeat playback function. OFF: The repeat playback function is disabled.
ON: When the tape ends, it is automatically rewound and played back again from the beginning.
Screens | Items |
| Set values |
| Function | ||
|
|
|
|
|
| ||
VTR MODE | REPEAT REC | [OFF] | Enables or disables the repeat recording function. | ||||
OFF: The repeat recording function is disabled. | |||||||
|
|
|
| ON | |||
|
|
|
| ON: When the tape ends, it is automatically rewound and recording | |||
|
|
|
| OFF | |||
| (VCR's display) |
| starts again from the beginning. When set to “ON”, the [REPEAT] | ||||
| VTR | 7 |
| ON |
| indication on the VCR’s display lights. | |
|
|
|
| ||||
|
|
|
|
| * If the menu switch <TAPE END MODE> on the <ALARM/SENSOR | ||
|
|
|
|
| MODE> screen is set to “STOP”, the Stop mode is engaged when | ||
|
|
|
|
| the tape ends even when there is an alarm or sensor recording. The | ||
|
|
|
|
| repeat recording is not executed. | ||
|
|
|
|
| * When this menu switch is set to “ON”, externally activated recording | ||
|
|
|
|
| is not executed. | ||
|
|
|
|
|
| ||
SRI/EXT | SRI/EXT REC | [OFF] | Selects series recording or automatic recording with an external VCR activation | ||||
signal. | |||||||
MODE |
|
|
| SERIES | |||
|
|
| OFF: | The series recording and automatic recording with an external | |||
|
|
|
| EXT | |||
|
|
|
|
| signal functions are disabled. | ||
|
|
|
|
|
| ||
| SR | ET | 1 | OFF | SERIES: The series recording function is enabled. | ||
|
|
|
| SERi | EXT: | The automatic recording function with an external signal is enabled. | |
|
|
|
| EiT | * When the menu switch <REPEAT REC> is set to “ON”, externally | ||
|
|
|
|
| activated recording is not executed. | ||
|
|
|
|
|
| ||
| EXT REC END | [NORMAL] | Selects the mode engaged when externally activated automatic | ||||
| recording ends. | ||||||
|
|
|
| OPE OFF | |||
|
|
|
| NORMAL: The Stop mode is engaged. | |||
| SR | ET | 2 | NORn | |||
| OPE OFF: The Stop mode is engaged and the operating power mode | ||||||
|
|
|
| POFF |
| is turned off. | |
|
|
|
| ||||
| CNT TAPE END | [OFF] | Outputs a tape end signal from the rear panel’s [TAPE END OUT] terminal | ||||
|
|
|
| 500 | when the tape reaches the set tape reel counter value during recording. | ||
|
|
|
| 1000 | During series recording, a series recording signal is output to a connected | ||
|
|
|
| . | VCR for continuous recording. | ||
|
|
|
| . | |||
|
|
|
| . | OFF: The counter end output function is disabled. | ||
|
|
|
| 9500 | |||
|
|
|
| 500 : A tape end signal is output when the set tape reel counter value is | |||
|
|
|
|
| |||
| SR | ET | 3 | OFF | . | reached during recording. A buzzer sounds when the menu switch | |
|
| . |
| ||||
|
|
|
| 500 | . | <END BUZ> on the <BUZZER/IN OUT> is set to “ON”. | |
|
|
|
| 9500 | |||
|
|
|
| . | For more information on the relationship between the tape reel | ||
|
|
|
| . |
| ||
|
|
|
| . |
| counter value and the tape remaining time, refer to page 64. | |
|
|
|
| 9500 |
| ||
|
|
|
| ||||
ALARM/ | REC MODE | [OFF] | Selects the alarm recording or sensor recording function. | ||||
SENSOR |
|
|
| ALARM | • Alarm recording: When an alarm signal is input to the rear panel’s | ||
MODE |
|
|
| SENSOR | [ALARM IN] terminal during recording, the mode switches to the 2H (SP) | ||
|
|
|
| ALL | or 6H (EP) recording mode for realtime recording of the alarm event. | ||
| AL | SE | 1 | OFF | • Sensor recording: When an alarm signal is input to the rear panel’s | ||
| [ALARM IN] terminal in the Stop mode (Stop mode, Timer Recording | ||||||
|
|
|
| ALAR | Standby or Operating Off mode), recording starts in the 2H (SP) or 6H | ||
|
|
|
| SENS | |||
|
|
|
| (EP) mode. | |||
|
|
|
| ALL | |||
|
|
|
| OFF: | Alarm or sensor recording is not executed. | ||
|
|
|
|
| |||
|
|
|
|
| ALARM: Alarm recording is executed. | ||
|
|
|
|
| SENSOR: Sensor recording is executed. | ||
|
|
|
|
| ALL: | Both alarm and sensor recording are executed. | |
|
|
|
| ||||
| REC SPEED | [2H] | Selects the recording mode for alarm or sensor recording. | ||||
|
|
|
| 6H | 2H: Records in the 2H (SP) mode. | ||
| AL | SE | 2 | 2H | 6H: Records in the 6H (EP) mode. | ||
|
|
| |||||
|
|
|
| 6H |
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
24 | 25 |