6 RECORDING
6-3 Timer Recording
6 RECORDING
6-3 Timer Recording
REC | STOP | REC |
|
|
|
|
|
| CHECK |
|
|
| OPERATE |
|
|
|
|
|
| HDR |
REW REVERSE PAUSE | PLAY FF |
|
|
|
| |
|
| TRACKING | V. LOCK | TIMER SEARCH DISPLAY LOCK CNT RESET | ||
FIELD REV |
| FIELD ADV – | + | – | + |
|
[TIMER] button
| [SHIFT 7] button |
| ||
[RESET/CANCEL] button |
| [SHIFT f] button | ||
SR- | 9090U |
|
| |
� | RESET/ |
| ||
REC |
| CANCEL | ON SCREEN | |
|
|
| ||
EJECT OPERATE |
| SHIFT | ||
MENU | TIME MODE | |||
RESET/ |
| |||
|
|
| ||
CANCEL ON SCREEN |
|
|
| |
SHIFT |
|
|
| |
MENU TIME MODE |
|
| – S E T + | |
– S E T + |
|
| ||
[MENU] button |
| [SET +] button | ||
|
| [SET | ||
Notes on Timer Recording
5 If you make a mistake when programming or no |
program is set and the [TIMER] button is pressed, the |
TIMER indication blinks for about 10 seconds and a |
warning buzzer sounds if <WARNING> in the |
<BUZZER> menu is set to “ON”. |
= |
Perform programming for timer recording |
5 If programmed data overlap |
When the [TIMER] button is pressed, the Timer- |
Recording Standby mode is engaged and the |
[OVERLAP] indication blinks for about 10 seconds, then |
lights. |
(However, if program timer settings and holiday timer |
5 During timer recording | |
The [PAUSE] or [STOP] button has no effect. | |
= |
|
Operation after pressing the [TIMER] button. | |
5 Timer recording |
|
The operating mode is turned on about 20 seconds | |
before recording starts and the VCR pauses. Recording | |
starts about 2 seconds before the actual programmed | |
start time. |
|
5 If no cassette is loaded | |
The TIMER and [ | ] indications blink and a warning |
buzzer sounds if <WARNING> in the <BUZZER> menu | |
is set to “ON”. |
|
= |
|
Load a cassette with safety tab. Cassettes with no tab | |
Canceling/Changing Timer Recording Program
1To stop timer programming before finishing
Press the [RESET/CANCEL] button.
2[The program being set is canceled.
Press the [MENU] button twice.
[The normal screen mode is restored.
1To cancel preset timer programs
Press the [TIMER] button so that the TIMER indication
2goes out on the display.
3Turn on the VCR and monitor. |
Press the [MENU] button to show the main menu screen |
and press the [SHIFT 7] button to select <PROGRAM |
TIMER> or <HOLIDAY SET>. Then, press the [SET |
button. |
[The <PROGRAM TIMER> or <HOLIDAY SET> menu |
4is shown on the monitor. |
1To modify timer programs
Press the [TIMER] button so that the TIMER indication
2goes out on the display.
3Turn on the VCR and monitor
Press the [MENU] button to show the main menu screen and press the [SHIFT 7] button to select <PROGRAM TIMER or <HOLIDAY SET>. Then, press the [SET
[The <PROGRAM TIMER> or <HOLIDAY SET> menu 4is shown on the monitor.
Press the [SHIFT 7] button or [SHIFT f] button so that
5the section you want to change blinks.
6Press the [SET
Press the [MENU] button twice. [The normal screen is restored.
settings overlap, the [OVERLAP] indication is not |
shown. In this case, the holiday timer setting has |
priority. The [OVERLAP] indication is not shown when a |
daily timer recording program overlaps with another |
program (even during program timer setting). The |
program with the earlier start time has priority.) |
= |
Check the program contents. |
(With program timer settings, the program with the |
earlier program time has priority.) |
5 When more than one timer recording is programmed |
= |
• The preset programs are executed consecutively |
beginning with the program with the earliest start time. |
The number of the program being executed blinks. |
*Program numbers are not displayed for holiday timer recording programs.
5When the timer recording mode is engaged after the start time has passed ...
When a power failure occurs within the set times and power is restored ...
are ejected. |
5 When the tape ends during timer recording |
=
The cassette tape is ejected.
When a cassette with safety tab is loaded, the timer recording
*However, if timer recording is executed in the Repeat Record mode, the cassette tape is not ejected at the tape end and repeat recording continues.
Press the [SHIFT 7] button or [SHIFT f] button to move
5the cursor to the program you want to cancel.
Press the [RESET/CANCEL] button.
6[The specified timer recording program is canceled.
Press the [MENU] button twice. [The normal screen is restored.
To use the VCR when the
•Press the [TIMER] button so that the TIMER indication goes out. After using the VCR, press the [TIMER] button again to engage the
•When all timer recording programs are completed, the TIMER indication goes out.
=
•Timer recording starts within the set times.
*If holiday timer and program timer settings overlap, the holiday timer setting has priority and starts.
*When program timer settings overlap, the program with the lower program number has priority and starts.
5When the timer recording settings are changed during timer recording
=
Changing the settings on the program timer setting screen or holiday timer setting screen during timer recording will have no effect. To change the settings, you must disengage the timer recording mode.
36 | 37 |