JVC HR-E639EE, HR-E539EE Activate Scene Finder, Stop Scene Finder, Next Function Memory

14EN

PLAYBACK(cont.)

Scene Finder

This function helps you check contents of unlabeled recorded tapes at the touch of a single button.

Search Search Search

SCENE FINDER	000	00000
000	0	000
000		0000
00		0
00		00
00		00
00		00
00		00

OPERATE

FF	REW FF	REW FF	REW
5 seconds	10 minutes 5 seconds	10 minutes	5 seconds
	on counter	on counter

NOTE:

Scene Finder cannot be used when the recorder is in the Record mode.

OPERATE

1 2 3

4 5 6

7 8 9

0

REW

STOP

SCENE FINDER C. MEMORY

ACTIVATE SCENE FINDER

1 Press SCENE FINDER. The recorder starts forward high- speed search for 5 seconds and then fast-forwards 10 minutes on the counter. This cycle is repeated until the end of the tape is reached.

●To start Scene Finder in the reverse direction, press SCENE FINDER and then press the REW button within 2 seconds. This cycle is repeated until the beginning of the tape.

●During Scene Finder, "PLAY" appears blinking on the display panel. During fast forward or rewind, " "

or " " appears on screen.

STOP SCENE FINDER

2 Press STOP.

NOTES:

●During Scene Finder high-speed search, you can also hear the tape sound. During fast forward or rewind, you hear the current TV sound instead.

●Scene Finder does not function during Index Search.

Next Function Memory

You can set your recorder's power to go off automatically after the tape is fully rewound. Before starting, make sure the recorder is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press OPERATE within 2 seconds.

NOTE:

If you want the power to be turned off automatically when the counter reads “0:00:00” (instead of at the beginning of the tape), press C.MEMORY so that the “M” mark appears before pressing REW.