JVC Setting Of The Colour System Select Buttons, Off-Air Recording, HR-E639EE/HR-E539EE

24EN

INFORMATIONONMULTI-SYSTEMCOMPATIBILITY

Setting Of The Colour System Select Buttons

Mode

AUTO

NTSC 3.58

NTSC 4.43

COLOUR

SYSTEM

NTSCPAL*

PAL

MESECAM

* "NTSC [ PAL" appears during playback only.

Use the COLOUR SYSTEM button on the recorder's front panel to select the colour system. Pressing this button changes the mode as illustrated on the left. The On-Screen display will show which mode is selected.

Mode Display	Description
AUTO	Usually set to this mode. This mode
(Colour Signal)	automatically detects PAL, NTSC, SECAM
	or MESECAM and adjusts to the colour
	system being recorded or played back.
	When it does not perform properly, set the
	colour system manually.
MANUAL	For recording, there is a choice of 4
(Colour Signal)	selectable modes; PAL/MESECAM/NTSC
	3.58/NTSC4.43. Select the mode that
	matches the colour signal being received.
	For playback, there is an additional mode
	which allows NTSC tapes to be played
	back and viewed on PAL TVs.

NOTES:

●In the AUTO mode, NTSC signals will be automatically recorded as NTSC 3.58.

●In the AUTO mode, NTSC tapes will be played back as NTSC 3.58.

●SECAM signals will always be recorded as MESECAM. Select the AUTO or the MESECAM mode when recording SECAM signals.

●When playing back a SECAM tape, select the AUTO or the MESECAM mode. The playback picture will always be monochrome.

●In the NTSC4.43 mode, with some TVs, on-screen displays (Program screen etc.) may roll up or down and there may be a loss of colour. When this happens, select the AUTO mode.

Off-Air Recording

The built-in multi-system tuner is capable of receiving PAL B/G and D/K, and SECAM B/G and D/K broadcasts.

TV system

HR-E639EE/HR-E539EE

Recorded tape

PAL B/G, D/K

SECAM B/G, D/K (OIRT)

Multi-system tuner (B/G, D/K)

Recording circuit

PAL

MESECAM

PAL

MESECAM

NTSC 3.58

NTSC 4.43

NOTE:

This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).