JVC HR-E639EE, HR-E539EE Select Televi- sion System, Tune The TV To Your Video Recorder

Page 4

4EN

INSTALLINGYOURNEWRECORDER (cont.)

Select Televi- sion System

Major countries	Colour TV broadcast	Switch
	system	position

China, Mongolia,	PAL D/K
Rumania	PAL D/K
Rumania
Bulgaria, Czech Rep.,		K
Bulgaria, Czech Rep.,
Slovakia, Hungary,	SECAM D/K
Poland, Russia

Austria, Denmark,
Finland,Holland, Italy,
Norway, Spain,	PAL B/G	G
Switzerland, Sweden,		G
Germany

Egypt	SECAM B/G

Tune The TV

To Your Video

Recorder

	000	0
000	0	000
000		0000
000		0
00		00
00		00
00		00
00		00

OPERATE

SET SYSTEM SWITCH

1 Set to the appropriate position depending on your TV system. (Refer to the chart on the left.)

NOTES:

●If no colours appear on the screen when using a multi-system television with its system select switch set to AUTO, change the switch position to correspond to the recorder's RF system select switch (G or K).

●For more information on multi-system compatibility. ☞ p.24

Back of recorder

TEST	SYSTEM
OFF – ON	K – G

The video recorder sends picture and sound signals via the RF connecting cable to your TV on UHF channel 36.

TURN ON THE RECORDER

1	Press OPERATE.
2	SELECT OUTPUT MODE
2	Set the TEST switch on the back of the recorder to ON.
3	SET TV CHANNEL
	Set your TV to the video channel (UHF channel 36).
	Two white bars appear on screen vertically.

●Tune the TV until the bars are as clear as they can be.

●Your TV should be set to the channel designated for use with a video recorder, or to a spare channel if there is not a specified video channel on your TV.

RESET OUTPUT MODE

4 Return the TEST switch to OFF.

NOTES:

●If CH36 is occupied by a local station, adjust the RF output channel adjustment screw to use another channel between CH32 and CH40 instead.

●If some interference noise is continually seen on the screen, consult your JVC dealer.

Image 4

Contents HR-E639EE Hi-Fi Safety Precautions ContentsCheck Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsSelect Televi- sion System Tune The TV To Your Video RecorderENABLE/DISABLE On-Screen DisplaysSelect Language ScreenAccess Channel SET Mode Select ScreenEN Initial Settings Tuner SetSelect Mode Select PositionStore Channel Select ChannelInitial Settings Perform TuningFine-Tuning Channels Already Stored Clock Set SET TimeSET Date SET YearBasic Playback Load a CassettePoint Start PlaybackPause During Playback Playback FeaturesActivate HIGH-SPEED Search Adjust Tracking Override Automatic TrackingManually Return to AutomaticActivate Instant Review Activate RepeatPlayback Activate Index SearchActivate Scene Finder Stop Scene FinderScene Finder Next Function MemoryRemote A/B Code Switching Tape Position IndicatorRental Return E639EE only Soundtrack Selection E639EE onlyBasic Recording Recording Features Access Mode Select S.T. Picture SystemEN Recording RecordingPlayback AuseTimer ProgrammingStart Time Enter Programme Stop TimeTimer Mode TimerEngage RECORDER’S Select ProgrammeInput Mode Edit To Or From Another Video RecorderMake Connections EditingEdit From a Camcorder SET RECORDER’S InputMode Start CamcorderOff-Air Recording Setting Of The Colour System Select ButtonsHR-E639EE/HR-E539EE Playback equipment Tape-To-Tape EditingDubbed tape Multi-Brand Remote Control Control Your TV Using Addi- tional ButtonsSET TV Brand Code TRY Operating TVClear Playback picture has a loss Corrective ActionOn Next Roubleshooting Timer againCheck the programmed data and re Quest Ions and Answers Playback RecordingHR-E539EE has only one Audio input connector Open the lid to access covered connectors and buttonsEN Index HR-E539EE has only one Audio output connector Available with HR-E639EE onlyHow To Use Installing BatteriesIndex Precautions Speci Fications ENDo not place the recorder Do not block the recorder’s ventilation openingsHR-E639/539EE