JVC HR-E539EE Remote A/B Code Switching, Tape Position Indicator, Rental Return E639EE only

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

1	REMOVE POWER SUPPLY
	Unplug the mains power cord from the mains outlet.
2	SET A/B CODE SWITCH
	Set to B.
3	RE-SUPPLY POWER
	Plug the mains power cord back into the mains outlet.
4	TURN THE RECORDER ON
	Press OPERATE on the remote control. The recorder
	will now only respond to B code signals.

NOTE:

Some TV sets may malfunction in response to the B mode. If this happens, switch back to the A mode.

EN15

Tape Position Indicator

The tape position indicator appears
on screen when, from the Stop
mode, you press FF, REW or
perform an Index Search. The
position of “5” in relation to “0”			3
(beginning) or “+” (end) shows you	0	+		+	+
where you are on the tape.					1:23:45

”O.S.D.” (☞ pg. 5) must be set to “ON”, or the indicator will not appear.

NOTE:

Depending on the type of tape used, there may be times when the indication is not correct.

Rental Return (E639EE only)

Simply by pressing one button, the recorder stops, rewinds, and ejects the tape for you. A quick and easy way to rewind rental video tapes before you return them to the shop.

1	ACTIVATE RENTAL RETURN
	Anytime except during recording, press RENTAL
	RETURN.
	● The recorder will rewind the tape to the beginning
	and eject it.
	● ] on the display panel will blink while in the
	Rental Return mode.
	● To cancel the Rental Return mode, press STOP.

Soundtrack Selection [E639EE only]

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO MONITOR (or on the remote control) changes the soundtrack being played back as follows:

TRACK					USE
Recorder's Front Panel	On-Screen Display
L + R			HI FI		For Hi-Fi stereo tapes
	L			R
L	L		HI FI		For main audio of Bilingual tapes
R			HI FI		For sub audio of Bilingual tapes
				R
NORM		NORM			For audio-dubbed tapes
L + R + NORM			HI FI		For audio-dubbed tapes
		NORM

NOTES:

●"L + R" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the NORM track is played back automatically for tapes with only normal audio.

●"O.S.D." must be set to "ON" or the on-screen displays will not appear (☞ pg. 5).